Product Description
Middle Wash Arm Tube Specifications
This tube attaches to your middle spray arm.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Kenmore Dishwasher Middle Wash Arm Tube
Troubleshooting
This part fixes the following symptoms:
Not cleaning dishes properly | Leaking
This part works with the following products:
Dishwasher.
This part works with the following products:
Kenmore, KitchenAid, Whirlpool.
Part# WP3378144 replaces these:
AP6008210, 3378144
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Lisa P - August 3, 2023
Verified Purchase
Easy to repair
Fit perfect, easy to install. Thanks!
Neil P - July 23, 2023
Verified Purchase
success
The part came quickly and in perfect condition. One small snag- the shape was slightly different than original. However a minor modification and presto. The dishwasher lives to wash many more loads. Thanks
Gary M - September 25, 2021
Verified Purchase
Easy repair
I was away on a fishing vacation and my wife changed the part easily. The video helped greatly. Thanks!!
Francine C - June 2, 2021
Verified Purchase
easy to put in, just needed to do some adjustment.
Working as it should.
Denis C - June 24, 2020
Verified Purchase
Indeed an improvement from the original design.
It does require a new cut in the collar that holds it in place. Easily installed.
Don M - October 13, 2019
Verified Purchase
Easy repair an the part worked as expected.
The part worked as expected. The part has been re-engineered as on my model it was actually two parts. The two parts had failed at the sleeve. The new part was all one piece andwith the repair guys video it was a very easy fix and the dishwasher works great.
Rob D - September 7, 2019
Verified Purchase
Great Part easy repair
The part was in great condition and it came super fast. My appliance is back in working order.
Demetrios Y - September 1, 2018
Verified Purchase
Easy repair et part work perfectly.
After watching the video, repair went fast! Good product a little different from the original: made completly of plastic our was part rubber but the machine works very well. Part was as described and delivery was rapid.Thank you.
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 25 reviews.
What's this?
- < Prev
- 1
- 2
- 3
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The upper wash assembly broke off. Then the middle wash arm tube just literally fell apart. I was concerned at first at the design changes, but I can see the wisdom in them. It only took a few minutes to repair and now it's like a new machine again. All for $20 instead of $500 or more for a new
First I took out the upper rack, unscrewed the old remains and screwed in the new part. Next, I took out the upper rack, turned it over, removed the old hanger (no longer necessary with newly designed part), unscrewed the other part, and screwed on the new part. So easy! And one more thing-I ordered my part on a Fri. and it was on my porch by the following Tues. Now THAT'S service! - Pam
Other Parts Used:
-
Pamela from St. Petersburg, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
36 of 39 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Rubber hose disconnected and accidentally thrown away
This part is different than the original but works great. I used Geronimo's instructions, but cut the ring (see below) so I didn't have to glue it back together.
1-remove upper rack by removing holding clips.
2-remove old assembly from Rack
3-Use exacto knife to cut old ring guide at top between 2 hooks to accommodate new style (one solid plastic piece). No need to re-glue since the hooks hold it up okay.
4-re-install upper rack
1-remove upper rack by removing holding clips.
2-remove old assembly from Rack
3-Use exacto knife to cut old ring guide at top between 2 hooks to accommodate new style (one solid plastic piece). No need to re-glue since the hooks hold it up okay.
4-re-install upper rack
Other Parts Used:
-
Boyce from Plano, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
13 of 14 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The original, detachable hose portion developed a hole and needed replacement
Pretty simple. Hardest part was working the end clips of the slide to remove top rack. You simply need to squeeze the plastic clip in to slide it out. Once the top rack is out, it was an obvious philips head screw removal and new part replacement.
Other Parts Used:
-
Laura from Marietta, GA
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
7 of 9 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
melted tube in upper rack
1-remove upper rack by removing holding clips.
2-remove old assembly from Rack
3-cut old ring guide to accomodate new style (one solid plastic piece) and reglue after accomodating new assembly
4-re-install upper rack
DONE
2-remove old assembly from Rack
3-cut old ring guide to accomodate new style (one solid plastic piece) and reglue after accomodating new assembly
4-re-install upper rack
DONE
Other Parts Used:
-
Geronimo from Miami, FL
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
6 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Original 3 piece Middle Wash Arm Tube assembly fell off during cycle, landing on drying heat element. On e part of assembly remained in place. It melted to state of non-usable.
I was hesitant at buying the Matag made replacement, especially since it was one piece as compared to my 10-year old 3 piece assembly, and my dishwasher is KitchenAid.
Ordered on a Sunday afternoon, had in hand Tuesday same week, one phillips head screwdriver to remove/replace. Everyone smiling!
Did not need to remove upper rack. Simply unscrewed 1 screw, put on new one-piece arm, replaced with same screw.
15 minutes!
Good price/delivery.
Ordered on a Sunday afternoon, had in hand Tuesday same week, one phillips head screwdriver to remove/replace. Everyone smiling!
Did not need to remove upper rack. Simply unscrewed 1 screw, put on new one-piece arm, replaced with same screw.
15 minutes!
Good price/delivery.
Other Parts Used:
-
GERALD from ARLINGTON HEIGHTS, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
6 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The rubber end of the middle wash arm tube broke and melted when it fell onto the heating element
I unscrewed the wash arm tube from the agitator, and then unhooked the plastice holders that held the arm tube, pulling those parts out of the dishwasher. I took the new (one piece!) wash arm tube in hand and then realized that I would have to cut the plastic holder in half because there was no way to get the new (1 piece) arm tube through the plastic holder. I cut the plastic holder in half, fit it around the arm tube, and super glued the holder back together, allowing it to dry for several hours just to be safe. After that, I simply screwed the entire thing back on, and we were good to go. It could not have been easier, except for the unexpectedness of have to cut the plastic holder. Saved us probably at least $100 worth of service call and parts.
Other Parts Used:
-
Kerry from Williamsburg, VA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
4 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The 'nozzle' end of the arm tube fell into the bottom of the dishwasher, and was partially melted by the heating element.
One screw was taken out, the old arm removed, the new one put in place, then attached to the new arm tube holder. TADA!!!! Done.
I am a widow, and think I saved about $75.00 doing this job myself. Thank you.
I am a widow, and think I saved about $75.00 doing this job myself. Thank you.
Other Parts Used:
-
Wendy from Wickenburg, AZ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
4 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
water delivery tube was worn out. I ordered a new one
Old style tube was an assembly of 3 separate parts, so it could come apart to pass through the holder bracket easily. New style tube was a single piece. The moldings on either end are too large to slip through the holder bracket circular ring. Apparently, the newer style holder brackets have a slit or break in the ring. Not so with the older bracket I had. I merely cut my own slit at the top of the ring on my old bracket, allowing me to spread the ring wide enough to allow either end of the single-piece tube to pass through. There is very little pressure on the holder bracket ring - it's just a holster for the tube. So the slit does not affect performance. Job done in 30 min.
Other Parts Used:
-
mike from BLOOMINGTON, MN
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The upper tube on the dishwasher was worn out
The part arrived much sooner than i was ready for. with a square allen wrench I was able to install the tube in no time.
Other Parts Used:
-
Wayne from Indianapolis, IN
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Wrench set
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The tube melted and fell off onto the heating coil
This was so simple, took one screw out to remove the old arm. Put the new arm in, put the screw back in and done. Great quick service to get the replacement part.
Other Parts Used:
-
Kimberly from Elmhurst, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
2 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- 2
- 3
- Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
June
November 4, 2017
My kitchen aid dishwasher i think is a 1997 model, anyways that is what is printed on the door. Do you think this part will fit?
For model number KUDS255HBT1
Hi June,
Thank you for your question. Yes this would be the correct part for your appliance. I hope that helps. Good luck with your repair.
3 people found this helpful.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11741343
Manufacturer Part Number: WP3378144
Manufacturer Part Number: WP3378144
Brand
Model Number
Description
Kenmore
66515897990
Dishwasher
- Kenmore Dishwasher Model 665.15897990 (66515897990, 665 15897990) Parts