Single Door Spring
Fits your 1106607400!
$10.11
Special Order
Fits your 1106607400!
PartSelect Number
PS11741307
Manufacturer Part Number
WP337186
Manufactured by
Whirlpool
Product Description
Single Door Spring Specifications
***The manufacturer suggests to replace both springs at the same time.***
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Door won’t close
This part works with the following products:
Dryer.
This part works with the following products:
Kenmore, Whirlpool, Roper, Kenmore.
Part# WP337186 replaces these:
AP6008174, 230132, 26000337186, 298252, 337186, 80002
Customer Repair Stories
Average Repair Rating: 4.6 / 5.0, 3 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Door springs and cables were broke, and the door catch was broke.
Removed screws by lint trap, used putty knife to pry top of dryer apart, use nut driver for two bolts that hold the front panel of dryer on, replaced parts, put it back together.
Other Parts Used:
-
Terry from ONAMIA, MN
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers
5 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The door cables broke and latch was warn to the point of being too loose
This model top can be popped off after removing the two screws under the lint filter. Once exposed remove the old cables and feed them through the hole on the front panel. Feed the springs through the ends of the cables and hook the other end into the dryer side panel slots towards the top on each side. Once both cables are fed, feed the opposite ends of the cables into the slots in the dryer door (after popping the white plastic covers out of them first). Put the white covers back into the slots to hold cables into doors. The door catch kit install is pretty obvious.
Other Parts Used:
-
Wiley from LIVONIA, MI
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
4 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the cable for the dryer door broke.
simple repair, pop the dryer lid, remove the screw for the front of the door. install cable and spring and then reassemble.
The only task that took some time was remembering to take out the screws for the lint port prior to lifting the lid.
The only task that took some time was remembering to take out the screws for the lint port prior to lifting the lid.
Other Parts Used:
-
Todd from WESTERVILLE, OH
-
Difficulty Level:Very Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11741307
Manufacturer Part Number: WP337186
Manufacturer Part Number: WP337186
Brand
Model Number
Description