Start-Device Combination
Fits your 10663832302!
$81.43
In Stock
Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
Fits your 10663832302!
PartSelect Number
PS11739951
Manufacturer Part Number
WP2258450
Manufactured by
Whirlpool
Product Description
Start-Device Combination Specifications
Start relay and overload for production compressor only. The start relay boosts the compressor, and then shuts off as soon as the motor gets up to speed. The overlay provides added protection against excessive current and against excessive temperature use.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Will Not Start
This part works with the following products:
Refrigerator.
This part works with the following products:
Whirlpool, Roper, Kenmore, Estate.
Part# WP2258450 replaces these:
AP6006864, 2258450
Customer Repair Stories
Average Repair Rating: 4.1 / 5.0, 2 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
loss of cold air and subsequent meltdown of contents
Shut of both freezer and refer section, as well as unplug unit. Remove h2o line to bottom of frig that supplies ice maker. Remove back panel and set aside. Remove green, red and white wires from relay and start device. Be sure to mark which goes where, it may seem simple, but 3-5 days later when the parts arrive, things may look different. Install the two replacement parts in the reverse order by which you removed them. Remember, white tabs are down and touch back of lower part when installed. Install panel and hto line, check for leaks, plug in and turn refer on.
Other Parts Used:
-
Jeffrey from Bedford, NH
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Wrench (Adjustable)
18 of 21 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Compressor hard to start,and pulling to many amps
Remove the cover off of the compressor connection box,,,pull the old start-device,replace it with the new one,and there it is running just fine. The amps droped to normal and the compressor is not over heating any more.Nothing to it. 15 to 20 min. Time to do the repairs
Other Parts Used:
-
Joel from Childress, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers
5 of 10 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jerry
July 22, 2019
How does the relay cover come off? (how to remove it to replace the relay)?
For model number Roeper RT 18DKXKQ05
Hello Kerry, Thank you for the question. You just need to pull it off and disconnect the wires. Take pictures of the wiring to refer back to when reinstalling. Hope this helps!
Was this helpful?
Thank you for voting!
CARMEN
October 23, 2019
Hi. I found the relay for my fridge but i am worry because the original is 115volt and the universal is only 110volt
For model number ET8CHMXKQ05
Hi Carmen, thank you for your question. We actually only sell OEM parts here, not universal parts. This part is the correct part for the model number that you provided according to your manufacturer directly, so you should have no issues with the part there. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
Marty
September 16, 2021
Hello, i bought the overload for my fridge and the one i received does not have a start capacitor. I had this worked on a few years back by a repairman and i believe he retrofited the start relay? Question: Will the factory replacement work without a capacitor? And if so, how do the two wired with the slide on ends connect to the factory replacements? I am an electrician, so i understand the lingo if that helps. I really appreciate your help!
For model number ET8CHMXKQ05
Hi Marty,
Thank you for your question. This start-device combination is listed under your model number and is designed to work on your refrigerator. We are showing a capacitor listed with the compressor on your refrigerator. Where the refrigerator was retrofitted, you will need to contact Whirlpool for information on how to install the parts. We hope this helps! If you have any questions, please let us know.
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11739951
Manufacturer Part Number: WP2258450
Manufacturer Part Number: WP2258450
Brand
Model Number
Description