Rear Leveling Leg and Foot with Pad
Fits your 6530A REV C!
$27.70
In Stock
Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
Fits your 6530A REV C!
PartSelect Number
PS11739532
Manufacturer Part Number
WP22004469
Manufactured by
Whirlpool
Product Description
Rear Leveling Leg and Foot with Pad Specifications
Sold individually.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Washer.
This part works with the following products:
Maytag, Norge, Magic Chef, Admiral.
Part# WP22004469 replaces these:
AP6006457, 22004469, 35-2050, 35-3020
Customer Repair Stories
Average Repair Rating: 2.3 / 5.0, 1 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Washer Traveled and load would not be balanced. Washer would bang loudly.
Followed directions from video on your site. It was very helpful. The snubber ring fixed the problem.
Other Parts Used:
-
James from ELMORE, OH
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Pliers, Screw drivers, Socket set, Wrench (Adjustable)
4 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Pamela
September 24, 2017
Do you have a video that shows how to install the part.I can not find it on the website.Thank you
For model number Maytag PAV3300AWW
Hi Pamela, Thank you for the question, we do not offer a video as of yet for this part. The previous customer that stated they watched the video was referring to the one offered for the snubber ring they also ordered. To install the leg and foot you just need to tip the appliance back and line the leg up with the hole and set the appliance down. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Richard
February 5, 2018
Are there any instructions or videos for replacing the rear leg on model mav8600aww washer. This is the long foot attached to the balance bar (the part select # is wp22004469 replaces: 22004469, 35-2050) ? Thank you. Richard (silver spring md)
For model number MAV8600AWW
HI Richard , Thank you for the question. Very sorry but we do not have a video as of yet for this Rear Leveling Leg and Foot with Pad.To install the leg and foot you just need to tip the appliance back and line the leg up with the hole and set the appliance down. Hope this helps!
Was this helpful?
Thank you for voting!
Tim
February 6, 2018
I am replacing the snubber ring and motor drive belt, noticed the rear self leveling legs rubber pads had worn through. I am going to replace the legs, it appears i will have to detach housing from the base to reach the pins for the legs, is this correct? And is there a spring for the leveling bar, the diagram does not show one. Thank you. Tim
For model number PAV2300AWW
Hello Tim, thank you for your question. There is no spring for the rear leveling bar. To install the leg and foot you just need to tip the appliance back and line the leg up with the hole and set the appliance down. Hope this helps!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11739532
Manufacturer Part Number: WP22004469
Manufacturer Part Number: WP22004469
Brand
Model Number
Description