Single Washer Inlet Strainer
Fits your MAH21PDCXQ!
$14.00
In Stock
Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
Fits your MAH21PDCXQ!
PartSelect Number
PS11739405
Manufacturer Part Number
WP22002960
Manufactured by
Whirlpool
Product Description
Single Washer Inlet Strainer Specifications
Found at the end of the inlet hoses.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Washer, Washer Dryer Combo, Dryer.
This part works with the following products:
Amana, Speed Queen, Maytag, Crosley.
Part# WP22002960 replaces these:
22002229, 22002960, 24122, 28605, F270200, R0600504, R0603506
Customer Repair Stories
Average Repair Rating: 1.5 / 5.0, 1 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Bad tube seals and bearings
Disassembled washer as per directions with seal kit. Removed inner tub. Cut both tub shaft bearing in half; punched out from outter tub. Installed new bearings using .5 inch threaded rod, washer and bolts. Installed new seal on inner tub shaft. Installed inner tube. Re-assembled washer.
Other Parts Used:
-
DAVID from SANDY HOOK, CT
-
Difficulty Level:Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Nutdriver, Socket set, Wrench set
1 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mike
February 19, 2018
I already changed the water inlet valve. Still with the same problem. The washer runs about half of the cycle and this message pops up. The washer did not appear to fill with water. Refer to the help section or users guide. Thanks
For model number Maytag Washer MAH7500AWW
Hello Mike, thank you for your question. I would recommend changing the Water Level Pressure Switch. If this doesn't fix the issue, there could be an issue with the electronic control board in the unit. I hope this helps!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11739405
Manufacturer Part Number: WP22002960
Manufacturer Part Number: WP22002960
Brand
Model Number
Description