Part Location Diagram of WP22002263 Whirlpool Light Bulb - 10W
See part 33 in the diagram
Replacing your Whirlpool Refrigerator Light Bulb - 10W
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.ca

Light Bulb - 10W

★★★★★
★★★★★
9 Reviews
$20.74
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS11739347
Manufacturer Part Number WP22002263
Manufactured by Whirlpool
Product Description

Light Bulb - 10W Specifications

This ten watt appliance light bulb is two inches tall. It is used with both washers and dryers.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your Whirlpool Refrigerator Light Bulb - 10W

Replacing your Whirlpool Refrigerator Light Bulb - 10W
Troubleshooting
This part works with the following products:
Refrigerator, Dryer, Washer Dryer Combo, Wine and Beverage Cooler.
This part works with the following products:
Whirlpool, Kenmore, KitchenAid, Maytag.
Part# WP22002263 replaces these:
AP6006279, 14200559, 14201091, 14210279, 14212817, 14218420, 17512, 18445, 21074, 21120, 22002263, 245535, 262465, 263313, 28329, 3178641, 3406124, 3406125, 3406126, 35001138 ... Show more , 4159007, 4173328, 4323686, 4343839, 4344602, 4344740, 4350095, 4352209, 4713-001199, 528513, 550025, 790862, 790871, 8206780, 851389, W10299463, W10809512, W11385701, WP22002263VP Show less
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
9 Reviews
4.3
Filter By Rating:
  • 5 Stars
    6
  • 4 Stars
    1
  • 3 Stars
    1
  • 2 Stars
    1
  • 1 Star
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 3.2 / 5.0, 19 reviews. What's this?
  • 1
  • 2
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Dryer was sqeaking loudly when running
I Looked on internet sites for this type of problem.
Most sites said the support rollers could cause this.
I found your site PartSelect and with help of your diagrams of the machine ordered the parts I thought were needed plus other parts that might cause the problem.
With machine torn down I replaced the rollers.
I had also ordered the main drive belt and idler assembly with the rollers and these also needed replacement. It is a good idea to order other suspect parts when doing this type of repair since you can return the parts not needed.
Your return policy is great.

Edward Brennan
Other Parts Used:
Idler Pulley Assembly BRACKET Rear Drum Support Roller Kit Roller Shaft Washer Multi Rib Belt - 92-1/4" Drum Roller Shaft - Left Side Drum Support Roller Shaft - Right Side Washer-Support Two-Piece Split Ring Bearing
  • Edward from Andover, NJ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers, Socket set
124 of 146 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Squeeling on startup and intermittently during use
First, I read reviews on this forum. Great help! I was betting, from previous reviews, that it was a drum roller. I took everything apart prior to ordering any parts. Sure enough, one drum roller was seized on the roller shaft. Decided to replace all rotating parts (rollers,shafts, belt, idler pulley) while everything was apart. I also took the opportunity to clean out all of the lint (there was a lot) from the motor and intake.
Parts were on my doorstep in two days. The dryer is like brand new. I could do this job again in less than an hour. This was money and time well spent.
Other Parts Used:
Roller Shaft Multi Rib Belt - 91-5/8 Inches Idler Pulley Wheel and Bearing Drum Support Roller Kit
  • Larry from Panama City Beach, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Screw drivers, Socket set
71 of 82 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer would stop running after several minutes. Once cooled it would start again. Motor worn out and binding.
Remove back cover
Raise top
Remove filter assembly
Remove front cover and drum

Tip: Use an end wrench on the fan and another on the pully shaft of the motor to remove fan from motor prior to removing motor from cradle.

Vacuum everything while disassembled

Remember to take your time and not force anything and this will go smooth.
Other Parts Used:
Rear Drum Support Roller Kit Multi Rib Belt - 92-1/4" Drive Motor with Pulley
  • Angela from Houston, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
41 of 54 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the water drain pump started to make grinding noises and poor draining
the repairs couldn't be easier, the pump came right out. just loosen the two water drain hoses and out it came. the intallation was just as easy...
Other Parts Used:
Remote Style Pump with Motor - 120V 80W
  • carlos from rio rancho, NM
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
21 of 25 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer working but drum light not working, bulb ok.
Problem: Drum light not working, bulb ok. Removed 6 screws on panel behind timer, light, buzzer, switches. Lifted back of dryer top then moved dryer top forward and off of dryer. The switch was located above the door. Unhooked wiring plug and took out 2 screws holding in the switch. Installed new switch and repaced bulb. Reassembled as needed and tested light by opening door. Works great.
Other Parts Used:
Dryer Door Switch
  • Denton from Indianapolis, IN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
21 of 26 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
burnt out bulb and broken switch
Both my husband and I are not good at DIY or fixing things. I watched the instruction video that was posted on the PartSelect web site. It seems easy to do it, however still very skeptical. My husband decided that there is nothing to lose in trying, so we ordered the parts. It is as easy and simple as the video instruction. We are very happy customers.
Other Parts Used:
Dryer Door Switch
  • fanny from madison, WI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
12 of 19 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
load banging noise when drun turns
removed front cover 2 lower screws. once front cover was off, the front drum support bracket was visable. removed 4 screws that hold that in. the drum is now loose and not supported in the front. pulled drive belt tensioner back to release belt. removed 2 top cover screws to get more vertical room to lift drum out. once drum was out, i used a snap ring plyers to take retainer ring off to remove damaged rear drum support rollers. replaced both rear rollers. also replaced drive belt and door lamp. the bearing in the left roller had seized and torn a big hole thru the roller . assembled in reverse order. now drum is nice and quiet
Other Parts Used:
Light Bulb - 7W Rear Drum Support Roller Kit Multi Rib Belt Multi Rib Belt
  • Randall from Hoffman Estates, IL
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Screw drivers
9 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer noisy and squeaking belt
Removed two screws from lint trap and pried front of top up gently. Top hinges backwards which is convienent. Two more screws take the front off. Removed drum and old parts. Removed rollers etc. Per the instructions. Cleaned inside of unit with a shop vac.

Reassemble unit and test. Nice and quiet again and working well. Great service fro. Partselect.com.
Other Parts Used:
Maintenance Kit
  • Matt from Cuyahoga falls, OH
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
6 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door switch had broken off and interior bulb not working
I first checked the owner's manual an on line documentation from the manufacturer on how to change the door switch on the dryer but found nothing. First step: Turn off breaker to dryer. I then popped the lid of the dryer and could see that the switch was accessible from the top. I was pleasantly surprised to see the parts arrive within 2 days with the lowest cost standard shipment. I loosened the 2 screws holding the switch, unplugged the modular clip, replaced switch, resecured with screws and dropped dryer lid back in place. Interior bulb was busted up, I removed cover plate, base and broken glass, seated replacement bulb, reattached cover and turned breaker back on. Dryer switch and bulb are working again. You sent me exactly what I needed and fast. Thanks for the quick turn around!
Other Parts Used:
Dryer Door Switch
  • Mike from La Vergne, TN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
4 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
noisy when running, squeeked at times, belt finally came off
First let me say I went on your forum and got instructions where to download a service manual which helped greatly. Unplugged from outlet. Removed 4 screws holding on the front panel then 4 more holding on the front tumbler support and air duct. Removed wires from light and dryness sensor and clips holding wires to panels. Pulled out the tumbler and removed belt. Removed the two drum support rollers and shafts by removing a nut on the back side of each shaft. Removed snap ring off each old shaft, installed new rollers and fiber washers onto new shafts installed snap ring and replaced on brackets with the old nut. Removed tension spring off idler pulley bracket and one screw holding on the bracket. Installed new pulley and fiber washers on new bracket and reinstalled bracket and spring. Placed new belt on tumber and reinstalled tumbler. Used drill and bit to drill out pop rivits holding on the two front glides that are attached on the front tumbler support and installed new glides and pop rivited in. Reinstalled
front support and air duct checking that felt tumbler seal front and rear were in place. Placed new belt on motor pulley and idler pulley. Reinstalled front panel. Removed bulb cover held on by one screw, Installed new light bulb. Also took shop vac and cleaned inside of cabinet when I had the tumber out. Plugged back in and started, sounds and works like new. Ordered parts on Sunday received Tuesday evening Fed Ex. First time dryer repair. Very happy with PartSelect web site and service.
Other Parts Used:
Roller Shaft Multi Rib Belt - 91-5/8 Inches Idler Arm and Shaft Idler Pulley Wheel and Bearing Front Glide Kit Drum Support Roller Kit
  • james from herington, KS
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Pliers, Screw drivers, Socket set, Wrench set
3 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

7 questions answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Roger
November 5, 2017
Kenmore 70 series dryer. When door is opened the light doesn't come on and the dryer continues to spin until turned off manually at the timer switch. Now sure if these problems are related but they occurred at the same time. Thanks for your help.
For model number 11076712694
PartSelect logo
Hi Roger, Thank you for the question. I suggest replacing the Door Switch Assembly,PartSelect Number PS11741700.A door switch is a simple on/off mechanism that prohibits the dryer from operating when the door is open.Hope this helps!

11 people found this helpful.

Was this helpful?
Thank you for voting!
Robert
June 24, 2019
I replaced light bulb in my drier with night light then it burned right out.Do i need to replace with same type?
For model number 11064852400
PartSelect logo
Hello Robert. Thank you for the question. You will need to use a special heat resistant appliance bulb. PartSelect Number: PS11739347. Hope this helps!

4 people found this helpful.

Was this helpful?
Thank you for voting!
Valencia
April 11, 2018
What size light bulb to replace by ice maker on outside of door. How do I do it. ?
For model number ED22RF
PartSelect logo
Hello Valencia, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is PartSelect Number: PS11739347 for the 10W bulb. Please type the part number into the site for the how to video. Hope this helps!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Mark
November 5, 2019
Dryer bulb burned out, opened door and saw a quick spark by the bulb and then the dryer failed. Could it be the bulb socket? I have removed it but can't locate the part number to replace it.
For model number GEW9250PW1
PartSelect logo
Hi Mark, thank you for your question. Here is that light bulb socket for you: PS1738111. It could be that part that is the issue. I hope that helps. Good luck with your repair.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Philip
December 9, 2019
Location of lamp bulb
For model number WGD4900XLO
PartSelect logo
Hello Philip and thanks for writing. For your convenience, we have attached the link to your manual with repair instruction. We hope this helps. Good luck with your repair https://partselectcom.azureedge.net/assets/manuals/0344AE6987D63CCB0EA15497A8E79BC46072D73B.pdf

2 people found this helpful.

Was this helpful?
Thank you for voting!
David
July 5, 2023
Is this the bulb for the water dispenser?
For model number MSD2651HEW
PartSelect logo
Hi David, thank you for your inquiry. The part you are referring to is not compatible with your model. The compatible light bulb for the water dispenser of your model is part number PS11731356. We hope this information is useful!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Tracy
September 13, 2022
Gas Dryer. Can I run a Gas Dyer without a light bulb? Conflicting answers..
For model number YMEDX6STBW1
PartSelect logo
Hello Tracy, Thank you for the question. It is not safe to operate the dryer without the light bulb in the socket. We hope this helps!

Was this helpful?
Thank you for voting!
  • 1
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11739347
Manufacturer Part Number: WP22002263
Brand
Model Number
Description
Kenmore
10644102300
Refrigerator
Kenmore
10644103300
Refrigerator
Kenmore
10644109300
Refrigerator
Kenmore
10650212011
Refrigerator - REFRIGERATOR
Kenmore
10650343011
Refrigerator - REFRIGERATOR
Kenmore
10650522102
Refrigerator
Kenmore
10650524102
Refrigerator
Kenmore
10650532102
Refrigerator
Kenmore
10650534102
Refrigerator
Kenmore
10651042101
Refrigerator
Kenmore
10651044101
Refrigerator
Kenmore
10651049101
Refrigerator
Kenmore
10651062101
Refrigerator
Kenmore
10651064101
Refrigerator
Kenmore
10651069101
Refrigerator
Kenmore
10651103111
Refrigerator - REFRIGERATOR
Kenmore
10651252103
Refrigerator
Kenmore
10651252104
Refrigerator
Kenmore
10651254103
Refrigerator
Kenmore
10651254104
Refrigerator
Kenmore
10651259103
Refrigerator
Kenmore
10651259104
Refrigerator
Kenmore
10651262102
Refrigerator
Kenmore
10651262103
Refrigerator
Kenmore
10651262104
Refrigerator
Kenmore
10651262105
Refrigerator
Kenmore
10651264102
Refrigerator
Kenmore
10651264103
Refrigerator
Kenmore
10651264104
Refrigerator
Kenmore
10651264105
Refrigerator
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service