INF LEVEL
$152.70
Special Order
PartSelect Number
PS11739308
Manufacturer Part Number
WP22001776
Manufactured by
Whirlpool
Troubleshooting
This part works with the following products:
Washer.
This part works with the following products:
Maytag.
Part# WP22001776 replaces these:
AP6006241, 22001776
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jerry
October 23, 2019
The only two water levels that i can get is large or xlarge no matter what the setting is. Cannot do a small or medium load with correct water level. What part do i need to fix that?
For model number LAT3500AAE
Hello Jerry, thank you for inquiring. This is most likely due to a faulty Water Inlet Valve, part number PS11739359 for your model washer. You may also want to consider replacing this Water Level Pressure Switch, part number PS11739308. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Graham
August 31, 2022
Our washer level selector has become "iffy". It sometimes works and sometimes doesn't. I suspect its the selector switch since retrying the switch usually makes it work.
For model number LAT3600aae
Hello Graham, thank you for contacting us. Before replacing the water level switch you need to check it for continuity. You will need a multimeter for this test. Set the multimeter on the lower scale to read ohms. The water level switch has three terminals that are marked 7, 15, and 16 showing top, middle, and bottom terminals respectively. You will have to test terminals 7 and 15 by connecting the probes of the multimeter to them. The reading should be close to 0. Now repeat the procedure to test terminals 7 and 16. The near 0 reading will show its good health. If you are not getting a near-zero reading, it would suggest the water level switch is defective and needs to be replaced. Please feel free to contact us if you have any follow-up queries.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Terri
June 9, 2024
No matter where we set water level, it fills to extra large level.
Help?...
For model number LAT2300AAE
Hi Terri, thank you for the question. Based on our understanding of the issue, we would suggest you replacing the water level pressure switch, part number PS11739308, to fix the issue. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11739308
Manufacturer Part Number: WP22001776
Manufacturer Part Number: WP22001776
Brand
Model Number
Description