Refrigerator Ice Container
Fits your 10654682300!
$191.41
In Stock
Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
Fits your 10654682300!
PartSelect Number
PS11739236
Manufacturer Part Number
WP2198573
Manufactured by
Whirlpool
Product Description
Refrigerator Ice Container Specifications
This ice container is for refrigerators and stores ice in the freezer compartment for dispensing.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Kenmore Refrigerator Refrigerator Ice Container
Troubleshooting
This part works with the following products:
Refrigerator.
This part works with the following products:
Kenmore, Whirlpool, KitchenAid, Maytag.
Part# WP2198573 replaces these:
AP6006170, 2198573
Customer Repair Stories
Average Repair Rating: 3.8 / 5.0, 5 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
could not dispense ice from door
no ice came out from the door dispenser after researching here i found it to be the auger drive motor for the ice dispenser cost $50.00 but was well worth it took less than 15 minutes to replace and was super easy to do. saved on service calls and repairman cg's. directions on how to were also found here and very helpful. i highly reccomend this site if you are a little mechanically inclined you can fix and save big!!!!!!!!!
Other Parts Used:
-
thomas from forked river, NJ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
72 of 91 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice bin retaining clip broken
Dumped out the ice, removed the broken ice bin by colapsing the undamage retaining clips and lifting away from the base and installed the new ice bin. Easy as ice!!!
Other Parts Used:
-
Russell from La Porte, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers
7 of 11 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the clips were broken
7 of the 8 clips where the ice bin meets the ice grinder were broken. We took out the ice bin and ice grinder, removed the old bin and put in the new bin. Requires no tools and pretty basic to repair.
Other Parts Used:
-
Elizabeth from Pittsburgh, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
6 of 11 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken plastic allowing ice to fall into the freezer.
At the bottom of the dispenser, mine had a motor coupler retained by a Phillips screw. The difficult part started when that screw would not budge. I had to drill it out. Be warned - when you remove the coupler do not allow the bent shaft that extends into the ice bin to slide out. If you do, the 5 crusher arms and a bunch of nylon spacers will fall into a heap. If that happens, notice the three rotating arms are labeled a,b,c. Note that there are 2 stationary arms that use the stepped washers. Use the wear marks on the shaft as a guide to spacer placement. Crushing is accomplished by reversing rotation, so index the arms with that in mind.
Other Parts Used:
-
allen from GLENARM, IL
-
Difficulty Level:Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Retainer legs broken
Turn off ice maker. Remove all ice from ice bin. Lift old bin from auger assembly. Place new ice bin legs in slots in top of auger assembly until they locked in place.
Other Parts Used:
-
ROBERT from CHESTER, SC
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Carol
January 28, 2019
How do i install my new ice maker i have ordered?
For model number 106.58906801
Hello Carol, Thank you for the question. The ice maker listed under the model number provided is PartSelect Number PS869316. If you type the part number into the search box it will pull up the ice maker and the video on how to install. Thank you for your inquiry, good luck with this repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Carol
January 28, 2019
My Kenmore ice maker (106.58906801) will not release. What should i do?
Hi Carol,
Thank you for your question. If the ice maker is not dispensing, We would recommend checking the following parts to fix your issue: ice mold, cycling thermostat, and ice maker control assembly. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, there are YouTube videos available to assist you. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ken
January 15, 2019
Does the ice bin contain all the metal parts to dispense ice or is it just the plastic ice basket?
For model number KSRS25IKWH01
Hello Ken, Thank you for the question. This is just the top clear bin as seen in the picture. Thank you for your inquiry, good luck with this repair!
Was this helpful?
Thank you for voting!
George
February 19, 2018
How do i remove the auger assembly for my ice maker when the button at the bottom is broken out?
For model number GS5SHAXSA01
Hi George,
Thank you for your question. There is a video on our website that you can reference on how to install the auger. The refrigerator and auger in the video may not show exactly like the ones you have, but it will give you a general idea on how to install the part. You will find the video under part number PS964350. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Randy
January 8, 2019
The inner workings of my ice crusher blades and components are rusting. I assume the blades are stainless but other parts must not be. I would like to find out how and how much it is to purchase all of the crushing components?
For model number 106.54616300
Hello Randy, Thank you for the question. Not all of the crusher parts are available and have been discontinued. I suggest replacing the full bin, PartSelect Number PS11740352. Thank you for your inquiry, good luck with this repair!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11739236
Manufacturer Part Number: WP2198573
Manufacturer Part Number: WP2198573
Brand
Model Number
Description