![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)
Ice Stripper
Fits your ARS2663AC!
$80.94
In Stock
Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
Fits your ARS2663AC!
PartSelect Number
PS11739041
Manufacturer Part Number
WP2182124
Manufactured by
Whirlpool
Product Description
Ice Stripper Specifications
This part strips ice from the icemaker mold during the ejection cycle to prevent ice pieces from falling back into the mold.
![How Buying OEM Parts Can Save You Time and Money How Buying OEM Parts Can Save You Time and Money](https://img.youtube.com/vi/d6AvOkulk_g/maxresdefault.jpg)
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Ice maker not making ice | Ice maker won’t dispense ice
This part works with the following products:
Refrigerator, Ice Maker, Freezer.
This part works with the following products:
Kenmore, Amana, Whirlpool, Maytag.
Part# WP2182124 replaces these:
AP6005979, 0312742, 14214059, 2182124, 627788, 8170929, 95102-1, R0183120, Y0312742
Customer Repair Stories
Average Repair Rating: 4.0 / 5.0, 3 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Ice stripper broken on ice maker
I unplugged the fridge. Loosened the 2 top screws on the ice maker and removed the lower screw. I disconnected the wiring harness and removed the Ice maker. I removed the plastic timer cover in front. I then loosened the screws on the face of the ice maker and removed the broken ice stripper and replaced it with a new one. Re-tightened the screws on the face, installed the timer cover, plugged in the wiring harness, re-attached the ice maker. Plugged the fridge back in and walla, it was making ice in 30 minutes!
Other Parts Used:
-
Kenneth from New Braunfels, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
17 of 24 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The ice stripper cracked from freezing.
There was three screws to remove to unmout the ice maker, and unplug the wire harness,then two to remove to slip in new stripper. All took about 20 mins.
Other Parts Used:
-
David from Discovery Bay, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
3 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice Stripper was broke off, leaving the mounting tabs still inside their respected spaces in the ice-maker
Had to remove the ice-maker (also easier than trying to work inside the freezer letting all the cold air out). A few mounting screws and an electrical connection in the back. After it was out you will need to remove the cover (not the superficial cover that just pries off) where the gear is behind it, just far enough so you can get the mounting tabs on the ice-stripper in. In order to to move this cover out, after removing the screws (the obvious), you'll need needle nose pliers to ever so slightly squeeze the plastic clips together that hold the plastic movable bracket and the metal ice level arm/switch, so it will pop out. Once you have room to put the ice stripper in, it should just all snap back together, then proceed in reverse to put it all back together.
Other Parts Used:
-
Jason from Draper, UT
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
2 of 10 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Paula
February 11, 2024
Ice maker keeps freezing up - the water in the chute freezes, preventing ice from being made - we have thawed it out a couple of times and the ice is made temporarily, but unit keeps freezing up - any suggestions?
For model number ED5RHEXNL03
Hi Paula, thank you for reaching out. Based on the description, the issue is with the icemaker mold thermostat, part number PS11743313. It monitors the temperature in the freezer to determine when to release the ice into the bin and start a new ice-making cycle. We would suggest replacing the thermostat to fix the issue. Glad to be of help!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Melinda
June 9, 2024
Our ice maker is making ice, but the stripper is only moving half of its rotation, not making a complete 360, to move the ice from tray into bucket.
For model number jf12589aes2
Hello Melinda, thank you for getting in touch. We have concluded that the issue is with the icemaker module, part number PS733947. We would recommend checking it to solve the problem. Glad to be of help!
Was this helpful?
Thank you for voting!
Related Parts:
Timothy
July 31, 2018
Ice maker not emptying tray and clicking noise coming from it
For model number HMG211460
Hi Timothy, Thank you for contacting us. Usually when you are having this issue you have to replace your ice maker itself. However you could test the cycling thermostat on your ice maker to make sure it is working correctly. If your cycling thermostat is not working then it will not activate the heater underneath your mold to help release your ice. If that thermostat is fine, then it is likely your ice maker that is the issue. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
EDWARD
May 27, 2022
ice cube at very back of tray catches ice cube and won't fill with water again. I need to hit ice cube to get it out of the way
For model number MBL2258XES1
Hi Edward,
Thank you for your question. If there is an ice cube that will not release from the ice maker, there may be an issue with ice mold. There is a heater on the ice mold that heats the mold just enough for the ice to release. If it is not producing enough heat, it may need to be replaced. If that is not the problem then you will need to inspect stripper arms. Once you have determined the part you need, please feel free to call customer service. We are open 7 days a week and anyone will be happy to assist you. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11739041
Manufacturer Part Number: WP2182124
Manufacturer Part Number: WP2182124
Brand
Model Number
Description
![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)