![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)
Timer Knob
$54.42
Special Order
PartSelect Number
PS11738843
Manufacturer Part Number
WP21001985
Manufactured by
Whirlpool
Troubleshooting
This part works with the following products:
Washer.
This part works with the following products:
Maytag, Hoover, Admiral, Crosley.
Part# WP21001985 replaces these:
AP6005784, 21001985
Customer Repair Stories
Average Repair Rating: 4.1 / 5.0, 4 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
motor & timer burned out
Removed top and front compartment and removed timer and motor , timer is a push-in type on the top panel , motor was removed by removal of the belt and screws and and wiring harness, about 30 minutes and 30 minutes to install motor,belt and timer.
Other Parts Used:
-
John from Bedford Hills, NY
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers, Socket set
7 of 14 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
timer knob broke during a move
well i used a couple of ball point pens to push the knob retainers together so the knob would pull off then simply pushed the new knob and skirt i purchaced from parts select . their prices and people were great i highly recommend them and will use them again for any other parts i might need in the future thanks guys Brian Halsey Oregon
Other Parts Used:
-
patrick from halsey, OR
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
6 of 10 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the timer went out on the washer
I had to drill and strap a piece of strapping iron on because the new timer had a broken tab on it.
Other Parts Used:
-
Mike from Holdrege, NE
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set
6 of 11 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washing machine was filling and draining at the same time...
A very easy fix. Just remove the timer's knob and skirt, remove the 3 screws on top of the control panel. Slide the panel forward to expose the timer, unplug the wiring harness, slide out the old timer, install the new timer, skirt and knob, plug in the harness, put the control panel in place, install the 3 screws, and you are finished. It took about 15 minutes...
Other Parts Used:
-
Joseph M from San Jose, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
5 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ursula
October 17, 2017
How do you remove old timer knob to replace with new knob
For model number MAVT446AWW
Hi Ursula, Thank you for the question. You will need to remove the screws holding the control panel in place first so you can tilt it forward. On the back of the timer switch you will see a small green D shape pin, push the pin in with a small headed screw driver and this will release the knob. Push the new knob back onto the shaft and reinstall the panel. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11738843
Manufacturer Part Number: WP21001985
Manufacturer Part Number: WP21001985
Brand
Model Number
Description
![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)