Micro Switch
Fits your 59657089791!
$56.20
Special Order
Fits your 59657089791!
PartSelect Number
PS11738246
Manufacturer Part Number
WP10533003
Manufactured by
Whirlpool
Product Description
Micro Switch Specifications
This micro switch is an inch and a half long.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Refrigerator, Washer Dryer Combo.
This part works with the following products:
Amana, Kenmore, Maytag, KitchenAid.
Part# WP10533003 replaces these:
10533003, 2-6417, 206417, 4343964
Customer Repair Stories
Average Repair Rating: 3.7 / 5.0, 3 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
water dispenser
I put in all new limit switchs. and put in a new water&icemaker valve. now it works great.
Other Parts Used:
-
MICHAEL from WHITEFIELD, ME
-
Difficulty Level:Really Easy
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers, Wrench set
18 of 41 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice/water switch burned out
The ice maker and water dispenser alway stayed on running it would not shut off automaticlly. i had to shut the power, so i took the front pannel ot were you put the cup in and notice the switch the pushes in and out did not go out it was on the pushed in and the clips were they are pluged inwere burned out so i took the switch off and lokked it up on this site and found exaccly what i needed.
Other Parts Used:
-
Pablo from Whittier, CA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
4 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice dispense would stick in ON position
Remove the slide-in tray. Remove just the 2 bottom screws of the panel, and slide the panel up to release the top. While suporting the panel, unplug the cable that goes to the PC board in the panel. Remove 3 screws that hold the assembly with ice and water dispenser actuator pad and switch and pull down and out. ( make note how the water tupe is routed for re-assembly) While supporting the assembly disconnect the 2 cables to the assembly. Replace the switch and actuator pad and reassemble. ( make sure the water tube is in the correct position).
Other Parts Used:
-
Michael from Kutztown, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
2 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11738246
Manufacturer Part Number: WP10533003
Manufacturer Part Number: WP10533003
Brand
Model Number
Description
Kenmore
56957085791
Refrigerator
- Kenmore Refrigerator Model 569.57085791 (56957085791, 569 57085791) Parts
Kenmore
56957087791
Refrigerator
- Kenmore Refrigerator Model 569.57087791 (56957087791, 569 57087791) Parts
Kenmore
56957089791
Refrigerator
- Kenmore Refrigerator Model 569.57089791 (56957089791, 569 57089791) Parts
Kenmore
56959082791
Refrigerator
- Kenmore Refrigerator Model 569.59082791 (56959082791, 569 59082791) Parts