Troubleshooting
This part fixes the following symptoms:
Not draining
This part works with the following products:
Dishwasher.
This part works with the following products:
Frigidaire, Electrolux.
Part# 5304504077 replaces these:
AP5989311
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Matthew D - June 25, 2023
Verified Purchase
Fixed overflowing dishwasher
Does what it's supposed to. Quick delivery. Expensive for one switch but fixed my problem of overfill. 3stars only because of the price. I'm sure it's a manufacturer price gouge though. Either way too darn expensive.
Art L - July 22, 2021
Verified Purchase
Great product, fast service
Very good package, good instructions to determine what version you have and which parts you need. In my case it turned the part wasn't required, there was a pistachio shell blocking the drain line. Check your drain before rushing to replace parts.
Nicholas F - December 11, 2019
Verified Purchase
Easy repair
This pressure sensor switch solved my i20 and i30 error codes on my Frigidaire professional dishwasher. I found a YouTube video and it took about 20 minutes to fix. Let’s hope it works long term.
Robert C - April 1, 2019
Verified Purchase
Part works great
Part was in great condition and arrived a few days early. Instructions were good but not 100% clear.
Matt M - February 19, 2019
Verified Purchase
Fixed the problem
This part was ordered to fix the i20 and i30 error codes I was getting with my Frigidaire Gallery dishwasher. Installation was fairly simple and has corrected these error codes
James S - January 11, 2019
Verified Purchase
Dishwasher fix
The right part delivered quickly.
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mark
January 17, 2019
Code 10 then code 30. Figured out that it is overfilling till it leaks out the door and triggers the code 30. What senses water level and tells it to stop filling and start washing.
For model number FGID2474QF0B
Hello Mark, thank you for your question. There are two parts we would recommend testing/replacing. The float switch PartSelect Number: PS10057465 and the pressure sensor switch PartSelect Number: PS11731946. These parts work to make sure the unit is filling appropriately. I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Amanda
May 13, 2019
I've had this thing serviced a few times in 3 years. Getting an error code .20. They came, charged me $200 - didn't fix. Said they need to order more parts. Haven't called them back at this point, thinking new dishwasher. Forums saying pressure sensor kit.
For model number FGCD2456QF0A
Hi Amanda,
Thank you for your question. The I20 error code appears when there is a water level or pressure sensor issue. When a cycle is operating in your washer, the sensor may become affected by debris. You will need to remove the two filters located below the bottom spray arm. There will be a small round hole on the tub’s left side that may allow debris in where the sensor is located. The sensor may need to be replaced. The new sensor will come with a filter cover, which should close the hole in the tub. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
RICHARD
June 22, 2023
got an error code 30. reset breaker for 45 min then code 10
For model number fpid2497rf2a
Hi Richard, thank you for getting in touch. The i30 error code on your dishwasher means that there is an overflow in the bottom tray of your machine, caused by overconsumption of water. Sometimes the pressure switch becomes clogged with fat or food and sends the wrong signals to the dishwasher’s control board, making it think the tank is empty. Therefore, the system does not create a command for its intake valve, preventing the membrane from closing. Water continues to flow into the dishwasher. It spills and enters the pan. The leakage sensor picks up the problem and responds to it by sending a signal to the main control. The i10 error code means that water does not enter the dishwasher for some reason, or rather, a pressure switch does not fix its gain to the desired level for the specified period. You need to clean the pressure switch, part number PS11731946, to correct this problem. If it is broken, you will need to replace it. We hope this helps, good luck with this repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Milo Rendon
April 22, 2018
Hi guys! My dishwasher isn't cleaning the dishes. The soap dispenser will not open during it's cycle. I can manually push the release button and it will open, but the soap pack is still intact.
For model number FPID2497RF1A
Hi Milo,
Thank you for your question. The detergent dispenser is designed to release detergent into the dishwasher tub during the wash cycles and will typically have two compartments, an unsealed compartment for prewash and a sealed compartment for the main wash cycle. Verify that the dispenser is not simply clogged with caked on detergent and give it a good cleaning if necessary. Also check to make sure that the cover for the dispenser will open easily and is not damaged or broken. Check the release mechanism for worn or defective parts and replace if necessary. The rinse aid dispenser is designed to release rinse aid into the tub during the rinse cycle. Verify that the dispenser is full and is not clogged with detergent and verify that the cap is adjusted properly. The dispensers may be operated by either a mechanical devise or by a bi-metal release or wax motor devise. Also, the rinse aid cap could be the reason why your dishwasher is not releasing rinse aid. The rinse aid dispensing cap is located on the inner door panel of your dishwasher. The rinse aid cap could be loose and may just need to be refitted, but could also be warped or damaged from the heat of the water in the dishwasher. Remove the cap from the door and inspect it for signs of melting or warping and replace if need be. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Rob
December 13, 2022
Getting an error code of 1, not sure what part would be causing this.
Thanks Rob
For model number EI24ID50QSOB
Hi Rob, thank you for contacting us. The error code 1 on the display of the Electrolux dishwasher indicates that there is a water leak in one of the system elements. We suggest that you check the drain hose, part number PS9492560. Also, check the dishwasher for any leakage which could be triggering this error. If you require assistance to place an order, please contact customer service. We hope that helps!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11731946
Manufacturer Part Number: 5304504077
Manufacturer Part Number: 5304504077
Brand
Model Number
Description