Spark Ignitor
Fits your EI30GS55LBA!
$93.07
In Stock
Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
Fits your EI30GS55LBA!
PartSelect Number
PS11728608
Manufacturer Part Number
808608802
Manufactured by
Frigidaire
Product Description
Spark Ignitor Specifications
The function of the ignitor in your range is to create the spark that ignites the gas on the burners. If your spark ignition system is not functioning properly, you may need to replace the ignitor. This part is approximately 3 inches in length. The ignitor is located in the rear of the range, so you will need to remove the back panel in order to access it for this repair. Before beginning this repair, be sure that the gas valve for the range is shut off. You should also disconnect the power source to the range before you begin.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Will Not Start
This part works with the following products:
Range.
This part works with the following products:
Frigidaire, Kenmore, Crosley, Electrolux.
Part# 808608802 replaces these:
AP5987234, 316262401, 316262405
Customer Repair Stories
Average Repair Rating: 3.9 / 5.0, 1 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Stove pilot not clicking on any burner, oven works fine
Unplug the range. Remove screw to Take of the back panel on upper right corner. Unclip the old spark module, unplug the wires with the needle nose pliers and plug them into the new spark module same as the old module. Clip it on. Replace the back panel.
Other Parts Used:
-
Colin from MORGANTOWN, WV
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Pliers
15 of 22 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Archie
November 7, 2019
Burners don't light an oven don't light, no clicking on both. What to do???
For model number 79072402013
Hello Archie, thank you for your question. If the top burners are not lighting and the oven isn't lighting, we would recommend testing the spark module PartSelect Number PS11728608, and the oven igniters and the gas valve. I hope this helps.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Nancy
October 13, 2023
The spark igniter does not click but can light the burner manually. Oven starts and works just fine.
I figure it’s the spark module, am I correct?
Thank you fir your help!
For model number FFGF3023LBE
Hello Nancy, thank you for reaching out to PartSelect. If none of the burners are working and you are positive that it is getting power, then the only part that can cause this issue is the spark module, part number PS11728608. Good luck with this repair!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11728608
Manufacturer Part Number: 808608802
Manufacturer Part Number: 808608802
Brand
Model Number
Description