Product Description
Motor Pulley Specifications
This part is the replacement motor pulley for your dryer. The motor pulley allows the dryer belt to run straight while the dryer is operating. If your motor pulley is damaged, your dryer may not tumble, and may not start altogether. A damaged motor pulley can also damage the dryer belt, and it may need to be replaced as well. Be sure to disconnect power from the dryer before you begin this repair. This motor pulley is a genuine OEM part sourced directly from the manufacturer.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Kenmore Dryer Motor Pulley
Troubleshooting
This part fixes the following symptoms:
Noisy
This part works with the following products:
Dryer, Washer Dryer Combo.
This part works with the following products:
Kenmore, Whirlpool, Maytag, KitchenAid.
Part# W10837625 replaces these:
AP5988738, 20066126, 3389729, 694872, 77766126, 8578220, W10402907, W10460106, W10509022
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Cole G - October 28, 2023
Verified Purchase
Easy repair
Parts came fast and the description worked well
Mike S - August 18, 2023
Verified Purchase
Part is good.
Everything went well, part came quickly, how to videos help. Thank you.
Peter M - December 31, 2018
Verified Purchase
Perfect partmatch!
The repair went quickly with the correct part! Thanks!
Sean G - September 2, 2018
Verified Purchase
Good Quality Part, a Bit Overpriced
This part came faster to my door than any appliance dealer in town could offer. Good quality. Works as advertised.
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 2.2 / 5.0, 2 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Broken Motor Pulley
I am a retired applaince repairman not recommended for amature to repair this model.
Other Parts Used:
-
Anthony from Lake Forest, CA
-
Difficulty Level:Very Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
19 of 70 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken Motor Pulley
Removed back panel of the dryer-reached my hand to the back of the motor shaft, put 7/16 wrench on it to hold the shaft while I removed the broken pulley with pliers. Very easy fix-the tech on Utube took the entire dryer apart totally unnecessary. If that is what the factory tells its tech"s to do its no wonder why the labor charge would be thru the roof.
Other Parts Used:
-
Mark from PELHAM, MA
-
Difficulty Level:Easy
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Pliers, Socket set
7 of 9 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Michael
October 30, 2017
My dryer is venting and spinning just fine I believe. But the clothes seem to stick to the inside of the drum while it spins and therefore they don't fall. I think this is because the drum is spinning too fast. If I understand correctly, this is a result of the grooves on the motor pulley being worn out. Replacing the motor pulley (part #29) will fix this issue. Is that correct?
For model number WED9500TW3
Hi Michael, Thank you for the question. Yes I suggest replacing the Motor Pulley. It will also be a good idea to replace or at least check the belt for as well. The worn down groves on the pulley can cause belt wear as well. Good luck with the repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Dennis
February 10, 2018
Are the internal threads left hand on part number w10837625 ?
For model number mdet446ayw
Hello Dennis, Thank you for your inquiry. We are showing that it is an internal right hand thread. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Melvin
December 31, 2019
Pulley has to be left hand treaded.Do not need any belts, has lots.For maytagperforma dryer.
For model number PDET920AZW
Hi Melvin, thank you for your question. Your motor pulley does not come separately from the motor. So you would have to get this part: PS11739459. Good luck with your repair.
Was this helpful?
Thank you for voting!
Related Parts:
Mitch
March 18, 2023
Will this part fit on my above referenced model? If not, please advise me of correct part number. Thanks
For model number kenmore 110.87088601
Hello Mitch, Thank you for your inquiry. We have researched the model number you have provided and confirm that this part will fit your model. We hope this helps you.
Was this helpful?
Thank you for voting!
Rob
April 9, 2023
Will this part work in place of part #PS11744884?
For model number YWED4850HW0
Hello Rob, thank you for your question. No, for your model you must use PS11744884. Good luck with this repair.
Was this helpful?
Thank you for voting!
Related Parts:
Daniel
March 26, 2024
I know I need this part to complete the repair. My only concern is the part shown doesn’t match the pulley on the actual motor. Is this part an upgrade to the original? I’m assuming it will work with my model number listed
For model number WED9450WR1
Hi Daniel,
Thank you for your question. Yes, this would be the correct pulley for your motor. We hope this helps!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11727942
Manufacturer Part Number: W10837625
Manufacturer Part Number: W10837625
Brand
Model Number
Description