CORD-POWER
Fits your 11026852504!
$114.97
Special Order
Fits your 11026852504!
PartSelect Number
PS11727764
Manufacturer Part Number
W10820044
Manufactured by
Whirlpool
Troubleshooting
This part fixes the following symptoms:
Will Not Start
This part works with the following products:
Washer, Refrigerator.
This part works with the following products:
Whirlpool, Kenmore, KitchenAid, Roper.
Part# W10820044 replaces these:
AP5988521, 285142, 285518, 285775, 285776, 285800, 3347005, 3348564, 3353152, 3360514, 3361759, 3948063, 3949248, 3956162, 62734, 661661, 8578842
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 2 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Ground prong on power cord was broken
Disconnected old power cord inside control cabinet, removed strain relief , then removed damaged power cord. Reinstalled new cord with new strain relief.
Other Parts Used:
-
RONALD from PORT ORCHARD, WA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
10 of 17 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Noticed agitator wasnt moving during wash and rinse cycles. Prior to repair no strange smell or noises
Went online to Parts Select and typed in Model #. Looked thru repair help and found very simular problems. I did disassemble the upper prtion of the aggitator by removing softner dispenser. Once inside I used a shoe string and routed it thru the two handles on the plastic cover and pulled up moderately, exposing the cam and doggs. I used a 7/16" socket on a 6" xtension to reach the mounting bolt. Slowly turn bolt counter-clockwise holding the lower agitator. Once the mounting bolt was out I temporarily replaced the plastic cover. I pulled up on the UPPER agitator to completely remove it from the tub. Once set on a firm surface I again pulled out the plastic cover ,bolt and cam cover, exposing the cam and dogs. I shook them out. I replaced everything with what was included in the agitator repair kit ( great kit). Everything for assembly is as the instructions state and totaly a reverse process. Take care not to over tighten the bolt. I did take this oppurtunity to clean the tub and agitators. I did also remove the lower agitator to clean the area. Thanks Parts Select!
Other Parts Used:
-
ARTHUR from FT HUACHUCA, AZ
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Socket set, Wrench set
4 of 11 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11727764
Manufacturer Part Number: W10820044
Manufacturer Part Number: W10820044
Brand
Model Number
Description
Kenmore
10682872600
Washer
- Kenmore Washing Machine Model 106.82872600 (10682872600, 106 82872600) Parts
Kenmore
1101050299
Washer
- Kenmore Washing Machine Model 110.1050299 (1101050299, 110 1050299) Parts