![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)
PARTS ASSEMBLY
$136.68
Special Order
PartSelect Number
PS11708924
Manufacturer Part Number
AGM73832002
Manufactured by
LG
Troubleshooting
This part works with the following products:
Washer.
This part works with the following products:
LG, Kenmore.
Customer Repair Stories
Average Repair Rating: 3.9 / 5.0, 1 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Right side plastic hinge broke after the damper went bad. Replaced right hinge and both dampers.
Started by lifting lid and removing the 2 rectangular plastic pieces that cover the hinge dampers (very small, thin flathead screwdriver). Removed hinge dampers (3 screws each) then removed lid. Removed the 2 top, front screws (covered with plastic caps). Then I removed the 2 screws on the top, back panel (nut driver). This allows the top to be lifted in a way that allows you to remove the screws (2 each) that secure the plastic hinge. Be careful here. The top has a wiring harness connected to it. Removed the screws from underneath the hinge and removed the hinge. Inserted the new hinge and screwed it in. After the hinge is installed you can reattach the top. Took this opportunity to clean everything with the lid removed. I then installed 2 new dampers. You’ll have to align the with the hinges so that the 2 flats on the damper shaft fit back into the hinge to secure the lid (easy). Tighten all the screws and voila!
Other Parts Used:
-
Jay from JACKSONVILLE, FL
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
6 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Brad
January 13, 2022
Is there a different part number for the left and right damper assembly?
Or are the interchangeable?
I need one for the right side.
For model number WT1501cw
Hi Brad,
Thank you for your question. The damper assembly can be used on both sides. If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.
1 person found this helpful.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11708924
Manufacturer Part Number: AGM73832002
Manufacturer Part Number: AGM73832002
Brand
Model Number
Description
![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)