![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)
Door Handle - White
Fits your YKHMS2050SS1!
$154.28
Special Order
Fits your YKHMS2050SS1!
PartSelect Number
PS1156042
Manufacturer Part Number
8206501
Manufactured by
Whirlpool
Product Description
Door Handle - White Specifications
Screws NOT included.
![How Buying OEM Parts Can Save You Time and Money How Buying OEM Parts Can Save You Time and Money](https://img.youtube.com/vi/d6AvOkulk_g/maxresdefault.jpg)
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Microwave.
This part works with the following products:
KitchenAid.
Part# 8206501 replaces these:
AP3886241, 1178049, 8206501
Customer Repair Stories
Average Repair Rating: 4.5 / 5.0, 2 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The door of my whirlpool microwave broke off
I purchased the door handle to model KHMS1850SWH0 for around $50; the model I have,KHMS1850SWH1, only offers the entire door as a replacement for over $200. The earlier model door handle fit great with no problems.
Other Parts Used:
-
Pete from Kensington, MD
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
5 of 20 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken microwave door handle
Oprnef the door frame and took off old handle
Other Parts Used:
-
jody from HENDERSONVLLE, NC
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
1 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Robert
April 12, 2018
Instructions on how to replace door handle on this model
For model number KHMS2050SSS0
Hi Robert, Thank you for the question. The clips holding the inner door liner in place are molded into the black plastic frame closest to the outer door liner on all four edges. Slide a putty knife (you may need a few) or thin butter knife into the space between that frame and the outer door liner at the top, upper left, about three centimeters in from the left edge. Push down while 'feeling' for a clip to release. Leave that knife there, and move across to the next one. They snap back into place if you don't have a knife blade or something similar there to stop them. Once the liner is removed you will have access to the screws holding the handle in place. Once the new handle is installed, gently press the inner liner back in place, holding the door frame pushed together and tighten (not too tight) the two screws on the right side of the frame. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Chris
August 2, 2021
How do you remove the inside door panel and reinstall the exterior door handle for KitchenAid khms1850swh 0?Thank you
For model number KHMS1850SWH-0 KitchenAid
Hello Chris, Thank you for your inquiry. To replace the door handle, you need to start by removing the top grill above the door using a phillips screwdriver to remove the two screws at the top of the grill then pull it out. You then need a torque screwdriver to take the top hinge screw out, and remove the door. Using a putty knife or flat dinner knife, remove the inner door trim, sliding it out from the inside. Pull the inner door out using a flat blade screwdriver. You should now have access to the handle. Remove the screws holding it in place, then attach the new handle and re-install the screws. Replace the inner door and door trim. Insert the door back into the opening of the bottom hinge, close the door and secure the top hinge. Line the top grill by matching the three bottom tabs with the holes and lift the top of the grill into place and reattaching the screws. Good Luck with your repair.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS1156042
Manufacturer Part Number: 8206501
Manufacturer Part Number: 8206501
Brand
Model Number
Description
![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)