Product Description
Lens Specifications
This part is a replacement lens for your oven or range. The lens is red in color, and when the elements are turned on, the light behind the lens will turn on to inform the user that the element is, in fact, on. The lens is a little less than half an inch in diameter and is made of plastic. If the light behind the lens still works, you should be able to simply remove the front panel and pop the damaged lens out of position, then replace it with the new one. This part is sold individually and is an OEM part sourced directly from the manufacturer.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your General Electric Range Lens
Troubleshooting
This part works with the following products:
Range, Cooktop.
This part works with the following products:
General Electric, Hotpoint, Kenmore.
Part# WB25T10041 replaces these:
AP3860491, 1166997, WB25K0002, WB25K2
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Chandrakant B - September 5, 2020
Verified Purchase
Great part
Fastest delivery superb product
Oanh V V - January 21, 2019
Verified Purchase
Works perfectly. Grreat Service
The product works perfectly. I am happy with the service and shipping time was fast. Will buy from them again.
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 4.1 / 5.0, 3 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Switch and burner dead
Removed rear panel, disconnected wires, unscrewed switch X2 - installed new parts in reverse order. Note: Would have appreciated new mounting screws with replacement switch.
Other Parts Used:
-
william from las cruces, NM
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
42 of 64 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
lens snapped off on the inside-plug was left loose
popped out the remainder of old lens, then pushed in new ones and slipped on plugs.
Other Parts Used:
-
RICKEY from MONTROSE, NY
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
3 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Hot burner light lens broke off.
Pull range away from back wall. Remove panel behind control knobs by removing the screws that hold it on. Find hot burner light that holds lens. Remove broken part of lens. Insert new lens into hole on front of control panel and into hot burner light receptacle. Replace back panel. Slide range back into place.
Other Parts Used:
-
Charles from NEKOOSA, WI
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
MICKEY
September 19, 2019
Burner light is still on even though all burners are off. It never goes out. Stays on all the time
For model number RB757WH4WW
Hello Mickey, thank you for writing. You will want to replace the Indicator Light, part number PS237433 for your model. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Bhagwat
January 13, 2022
Locked light is on but burner is unlocked and burners are off, starting burner makes noise!
For model number PGP976SET1SS
Hello Bhagwat, thank you for your question. These cooktops have a manual gas shut off. When “LOCKED” gas does not flow to any of the burners and if a burner knob is moved to the LITE position, a buzzer will remind the consumer that the cooktop is locked. We recommend the Switch Harness Assembly PartSelect Number PS11725188. Good luck with your repair.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS1020380
Manufacturer Part Number: WB25T10041
Manufacturer Part Number: WB25T10041
Brand
Model Number
Description