Product Description
Adaptor Pump Assembly Specifications
This part is the replacement adaptor pump assembly, also known as the check valve and hose assembly for your dishwasher. It is made of white and brown plastic, and is approximately 4 ½ inches long, 1 ¼ inches wide and the opening at the top is about an inch in diameter. The adaptor pump assembly connects the sump and the drain pump, and prevents dirty water from getting back in. If it cracks, it can cause a water leak, and will need to be replaced. This part is sold individually and is an authentic OEM part sourced directly from the manufacturer.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Leaking | Not draining
This part works with the following products:
Dishwasher.
This part works with the following products:
General Electric, Hotpoint.
Part# WD12X10189 replaces these:
AP3860894, 1168256
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Karine R - February 8, 2022
Verified Purchase
perfect
it was exactly what I needed to fix my dishwasher leak
Randy H - October 16, 2018
Verified Purchase
Easy repair and works great
I had the part delivered within a couple days of order. The whole process was made easy, the cost was reasonable and would not hesitate to use Part Select again.
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 3.4 / 5.0, 4 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Rodents ate the sump inlet so machine leaked everywhere!
Turned off electric at the fuse box and shut off the water. Pulled the dishwasher out and took out bottom sprayer (pull up and twist), filter basket etc. Then put the washer on its back and removed sump inlet and adaptor. This entails removing a couple of hose clamps and 4 bolts that hold sump inlet in place. Replaced with new. Turned over the machine and reinstalled the filter basket and sprayer after cleaning them. Reconnected the water and turned on the power. Machine works like new!!! Total parts cost me less than $50. Repair guy wanted around $300 to do it!!!!
Other Parts Used:
-
Hossein from Tarrytown, NY
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers, Wrench (Adjustable)
15 of 16 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Mouse had chewed through the adapter pipe
Removed the dishwaher from under the counter. Removed the adapter pipe by removing two nut drive jubilee clamps. inserted the new adapter pipe in the alignment grooves, Tightened the jubilee clamps. Tested the unit on rinse cycle. Reinstaled dishwasher under the counter. Easy.
Other Parts Used:
-
Andrew from Staten ISland, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
6 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Leak under the appliance
After finding the leak source I have targeted the piece part on your web. It came 2 days after and I replaced the defective part by the new one. I switch off the water, untied the nut to release the pipe, take out the part.
Other Parts Used:
-
paul from arlington, MA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Wrench (Adjustable)
3 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Leaking hose
You tube
Just mack sure the electric is off - breaker and live wire check pre starting
Just mack sure the electric is off - breaker and live wire check pre starting
Other Parts Used:
-
JANET from SANDY SPRING, MD
-
Difficulty Level:Easy
-
Total Repair Time:1- 2 hours
-
Tools:Screw drivers, Wrench (Adjustable)
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Peter
November 16, 2021
MY DISHWASHER DISPLAY SAYS "LEAK DETECTION" AND WILL NOT OPERATE. I CANNOT FIND ANYTHING IN THE MANUEL ABOUT THIS NOR THE CURE. THANKS
For model number PDW9280N20SS
Hello Peter, Thank you for the question. We suggest checking the Drain Pump, Hoses, Sump and the underside of the appliance to check for a leak. We hope this helps!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS1019542
Manufacturer Part Number: WD12X10189
Manufacturer Part Number: WD12X10189
Brand
Model Number
Description