LIGHT INDICATOR
Fits your 2784238893 Wall Oven!
$15.73
Special Order
Fits your 2784238893 Wall Oven!
PartSelect Number
PS1019027
Manufacturer Part Number
WB25T10040
Manufactured by
GE
Troubleshooting
This part works with the following products:
Range, Wall Oven.
This part works with the following products:
General Electric, Kenmore, Hotpoint, RCA.
Part# WB25T10040 replaces these:
AP3967316, 1262760, 331717, 4336634, WB25X0093, WB25X93
Customer Repair Stories
Average Repair Rating: 3.9 / 5.0, 1 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The indicator light stopped working
I knew the lens (which also holds the light) was broken. I also ordered the light. I flipped the circuit breaker, raised the stove top and removed the 6 nut-head screws holding the cover plate. A nut driver would have been helpful, but I got by with a 6" crescent wrench. I removed the cover. I unplugged the two wires from the old light and plugged in the new one. I inserted the new lens and slipped the light over it. I flipped the circuit breaker on to make sure it worked. After flipping the circuit breaker off, I replaced the cover plates and the screws and lowered the stove top. I flipped the circuit breaker on. It worked!
Other Parts Used:
-
Charles from Damascus, MD
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Wrench (Adjustable)
3 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Gino
October 16, 2017
Light indicator stays on, even when all burners are off.
For model number JMS08BD3CT
Hi Gino, Thank you for the question.Normally when the light will not turn off you need to replace the Surface Burner Switch that turns the element on and tells the light when to turn on and off. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS1019027
Manufacturer Part Number: WB25T10040
Manufacturer Part Number: WB25T10040
Brand
Model Number
Description