Product Description
Middle Spray Arm Specifications
This part is the replacement for the middle spray arm in your dishwasher. The middle spray arm is mounted on the bottom of the middle dish rack, and it should rotate and spray water during the operating cycle. If your spray arm is clogged or damaged, the spray arm will need to be replaced. Debris and hard water buildup in your dishwasher is often the cause of a clogged spray arm. To replace the spray arm, simply turn the arm counter clockwise to release it from the dish rack. Then, screw in the new spray arm and your repair is complete. This part is sold individually.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Not cleaning dishes properly
This part works with the following products:
Dishwasher.
This part works with the following products:
General Electric.
Part# WD22X10048 replaces these:
AP3868882, 1168309
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
JANET V - May 25, 2021
Verified Purchase
Easy repair. Exactly what we needed.
The part was exactly what we needed. Dishes on the top rack were never clean, especially the insides of the mugs and bowls Everything is now sparkling clean. Very pleased.
John L - May 26, 2019
Verified Purchase
Works great. Simple yo install. Fast shipping
Made my fish washed work like new again
Timothy D - January 19, 2019
Verified Purchase
The repair was easy as falling of a log
good fit on the part, easy fix on the dishwasher, works like it was just new again.
JAMES P - October 6, 2018
Verified Purchase
Good Part
Part seems to work well. Poor design tho, as it copies the one it replaced.
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 4.8 / 5.0, 3 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
the dishes were not getting cleaned
I pulled out the racks and decided to take off the upper (mid) arm. It came off with an adjustable wrench. When I looked at the arm I could tell that some of the holes were blocked. Some debris had gotten lodged in the holes and were blocking the water flow. I used tweezers to remove the debris and it solved the problem. I then pulled out the lower arm and cleaned it with warm water. There were soap deposits and I wondered if other debris could be blocking this as well. Finally I went onto the web site and saw that for $40 including shipping I could replace these parts with brand new parts. I did and the machine washes like new again.
Other Parts Used:
-
James from Portsmouth, NH
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Wrench (Adjustable)
17 of 34 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Front gasket leak, jets clogged, keypad shorted out
Based on parts select diagrams, I removed the sprayer arms and replaced them along with new washers/bushings.
I simply pulled the front gasket out
I simply pulled the front gasket out
Other Parts Used:
-
Robert from Sacramento, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver, Screw drivers
8 of 56 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
emit holes partially plugged and metal of lower arm separated
lower arm lifts off and new sets right on. The upper arm needed a "holding" screw removed (from under the shelf) and replaced with the new arm.
Other Parts Used:
-
Mary from LARAMIE, WY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mali
September 28, 2017
This is a dishwasher in the house i just bought. My dishes were not getting clean. I've put new wheels on the lower basket, and new lower, mid and upper spray arms. The old arms were really gunked up. When i open the door mid-cycle, the lower arm is spinning, but the mid-arm is not moving, and based on what i'm seeing inside the glasses on the upper rack i don't think water is coming out of it. I've checked the mid spray arm, and there seems to be some play in it. Is that normal? Is there anything i can be checking to further trouble-shoot, rather than just replacing a bunch more parts?
For model number PDW8480J10SS
Hi Mali,
Thank you for your inquiry. If there is very little water coming from the middle spray arm, I would check the water lines and the water inlet valves to see if they are causing the issue. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS1016904
Manufacturer Part Number: WD22X10048
Manufacturer Part Number: WD22X10048
Brand
Model Number
Description