Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
David
September 25, 2019
Water comes out of lower spray arm, but none out of the manifold or upper spray arm. Upper spray arm hole are not clogged. There is some slop in the upper bearing (if there is one) in the circulation pump, but it does generate enough pressure to slowly rotate the arm and spray barely reaches the top of the Dishwasher. Advice?
Hi David, I would make sure the feed tube W10861745 is clogged or full of gunk as this could be your issue. Thank you for your question and good luck with your repair!
Was this helpful?
Thank you for voting!
David
September 25, 2019
I asked a question recently about not getting flow out of either the spray manifold or the upper and middle spray arms. You suggested I look for a clogged passageway. Neither the manifold nor the tubes that serve both the middle spray arm and the top sprayer are clogged. I noticed after removing that assembly that there is a disc with a round hole in it above the pump, below the spray arm tube connections. It looks like it may rotate to alternately supply water to the various manifolds. Is this True? Perhaps it is not rotating? How can I fix it? All tubes and orifices are clear. Pump has slop on upper bearing (if there even is one) maybe pump works but pressure is low for some reason? It squirts water out of the lower spray arm that barely reaches the top of the dishwasher. Is that the right amount of pressure? Hate to replace the pump if it's not the problem. Please help. Thank you!
For model number WDF760SADM0
Hi David,
Thank you for your question. To verify if the pump is working correctly, you will need to test it with a multimeter. Here is a link to one of our videos on YouTube that you may use as a general reference on how to use one, https://www.youtube.com/watch?v=bWC44fHn0As. If you suspect that the water pressure is low, make sure that the water is turned on all the way. Before starting a load of dishes, run the hot water for a few minutes before starting the dishwasher to make sure that the water is both hot enough to clean the dishes and that you are getting adequate water pressure. If the water pressure to the dishwasher is good, the issue may be the water inlet valve and you will also need to test it with a multimeter as well. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS10062389
Manufacturer Part Number: W10671899