SWITCH ASSEMBLY
Fits your E24ID75SPS2A!
$97.18
In Stock
Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
Fits your E24ID75SPS2A!
PartSelect Number
PS10057465
Manufacturer Part Number
A00056504
Manufactured by
Frigidaire
Troubleshooting
This part works with the following products:
Dishwasher.
This part works with the following products:
Frigidaire, Electrolux.
Part# A00056504 replaces these:
14000056504, A00056502
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bruce
May 10, 2019
I have a code i.30 and the drain pump runs continually. Which part is the likely suspect?
For model number FGCD2456QW0A
Hi Bruce, thank you for your question. That error code indicates that you have a leak or an over flow of water. Look for loose connections at the water inlet valve and make sure that the dishwasher itself is properly leveled. If it is then you may have to test your water inlet valve for malfunctions with a multi meter. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Alan
October 26, 2017
Does this switch, part number a00056504 prevent the dishwasher from overfilling or does it shut off the water if it drains into the pan under the dishwasher? Thanks
For model number FGID2474QF0B
Hi Alan,
Thank you for your inquiry. Yes, this is the float switch and it will prevent the dishwasher from overfilling with water. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
MARK
March 8, 2022
ELECTROLUX DISHWASER in constant drain and alarm 3 beeps just wondering if the float switch is faulty or in a flooded chamber 7 years old washer .Thanks ,
For model number EI24ID30S0QS0B
Hello Mark, Thank you for your inquiry. If the dishwasher is beeping 3 times and constantly draining, this means it is detecting a leak causing water to accumulate at the bottom of the appliance. We would recommend checking the float switch, the water inlet valve, and the pressure sensor switch. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS10057465
Manufacturer Part Number: A00056504
Manufacturer Part Number: A00056504
Brand
Model Number
Description