Models
>
WDES9428F
WDES9428F ((00)) LG Range - Overview
Sections of the WDES9428F
[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Vent - Black
PartSelect #: PS11762079
Manufacturer #: MJZ41753802
This vent trim measures 75.6 x 5.7 x 1.3 cm and weighs 227 g. This part is designed for use with ovens and ranges. Your appliance needs a ventilation system so it can properly circulate air. This allo...
$71.03
In Stock
Questions And Answers for WDES9428F
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the WDES9428F
[Viewing 4 of 4]Little to no heat when baking
Fixed by
these parts
these parts
Show All
Oven not heating evenly
Fixed by
these parts
these parts
Show All
Oven is too hot
Fixed by
these parts
these parts
Show All
Element will not heat
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Convection Fan stopped working, would spin but not continuously on its own
Unplugged oven electric and turned gas off. Removed all back covers from the unit. Removed the cover on the inside covering the burner and fan in the back of the convection oven. Removed the nut securing the fan to motor shaft with helper holding the motor. Removed the three electrical wires attached to motor, making note where they go. Removed screws mounting the motor to oven. Removed motor cooling fan and shaft spacer from old motor. Fit in same orientation on new motor. Replace all parts in reverse order, restore gas and electric, turn on and test.
Parts Used:
-
Barry from PIERRE, SD
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
6 of 9 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
missing lower vent (trim)
Replace missing vent. Pretty well straight forward. Not complicated at all. Three screws is all it took, done.
Parts Used:
-
Cliff from Coeur D'Alene, ID
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!