Models
>
VGD6505GW0
VGD6505GW0 Crosley Dryer - Overview
Sections of the VGD6505GW0
[Viewing 6 of 6]Keep searches simple, eg. "belt" or "pump".
![Multi Rib Belt - 92-1/4" – Part Number: 341241 Multi Rib Belt - 92-1/4" – Part Number: 341241](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/346995-1-S-Maytag-341241-Multi-Rib-Belt-92-1-4-quot.jpg)
Multi Rib Belt - 92-1/4"
PartSelect #: PS346995
Manufacturer #: 341241
This dryer drum belt has four ridges, three grooves and is 1/4" wide.
$21.85
In Stock
Order within the next 4 hrs and your part ships today!
![Dryer Cycling Thermostat – Part Number: WP3387134 Dryer Cycling Thermostat – Part Number: WP3387134](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/11741405-1-S-Maytag-WP3387134-Dryer-Cycling-Thermostat.jpg)
Dryer Cycling Thermostat
PartSelect #: PS11741405
Manufacturer #: WP3387134
$35.55
In Stock
Order within the next 4 hrs and your part ships today!
![Leveling Foot – Part Number: 49621 Leveling Foot – Part Number: 49621](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/1609293-1-S-Maytag-49621-Leveling-Foot.jpg)
Leveling Foot
PartSelect #: PS1609293
Manufacturer #: 49621
Sold individually.
$10.80
In Stock
Order within the next 4 hrs and your part ships today!
![Roller Support Tri-Ring – Part Number: WPW10512946 Roller Support Tri-Ring – Part Number: WPW10512946](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/11755850-1-S-Maytag-WPW10512946-Roller-Support-Tri-Ring.jpg)
Roller Support Tri-Ring
PartSelect #: PS11755850
Manufacturer #: WPW10512946
If you notice that your dryer is noisy or will not tumble, you may need to replace the tri ring. This part is triangular, and is less than an inch in size. Tri rings can be found both on the idler pul...
$17.06
In Stock
Order within the next 4 hrs and your part ships today!
![Touch-Up Paint - White – Part Number: 72017 Touch-Up Paint - White – Part Number: 72017](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/385132-1-S-Maytag-72017-Touch-Up-Paint-White.jpg)
Touch-Up Paint - White
PartSelect #: PS385132
Manufacturer #: 72017
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$10.18
In Stock
Order within the next 4 hrs and your part ships today!
![Dryer Door Handle - White – Part Number: W10861225 Dryer Door Handle - White – Part Number: W10861225](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/11731583-1-S-Maytag-W10861225-Dryer-Door-Handle-White.jpg)
Dryer Door Handle - White
PartSelect #: PS11731583
Manufacturer #: W10861225
$52.98
In Stock
Order within the next 4 hrs and your part ships today!
![Drive Motor with Pulley – Part Number: 279827 Drive Motor with Pulley – Part Number: 279827](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/334304-1-S-Maytag-279827-Drive-Motor-with-Pulley.jpg)
Drive Motor with Pulley
PartSelect #: PS334304
Manufacturer #: 279827
This motor fits most Whirlpool incorporated dryer brands before 1996. NOTE: Pulley is NOT available separately.
$158.44
In Stock
Order within the next 4 hrs and your part ships today!
![Dryer Lint Screen Filter – Part Number: WPW10717210 Dryer Lint Screen Filter – Part Number: WPW10717210](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/11757278-2-S-Maytag-WPW10717210-Dryer-Lint-Screen-Filter.jpg)
Dryer Lint Screen Filter
PartSelect #: PS11757278
Manufacturer #: WPW10717210
This manufacturer-certified dryer lint filter is used to collect lint during the dryer cycle, to prevent damage to the machine and to prevent lint from sticking to clothes. This model comes in white a...
$59.11
In Stock
Order within the next 4 hrs and your part ships today!
![Rear Drum Felt Seal – Part Number: W10612022 Rear Drum Felt Seal – Part Number: W10612022](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/8691753-1-S-Maytag-W10612022-Rear-Drum-Felt-Seal.jpg)
Rear Drum Felt Seal
PartSelect #: PS8691753
Manufacturer #: W10612022
This seals Includes adhesive. This part helps seal the drum to prevent hot air from escaping.
$82.23
In Stock
Order within the next 4 hrs and your part ships today!
![Dryer Blower wheel – Part Number: WP694089 Dryer Blower wheel – Part Number: WP694089](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/11743785-1-S-Maytag-WP694089-Dryer-Blower-wheel.jpg)
Dryer Blower wheel
PartSelect #: PS11743785
Manufacturer #: WP694089
The blower wheel is a squirrel cage type wheel whose purpose is to move the air through the room or appliance. The blower wheel spins on the motor shaft to blow air through the dryer drum and out through the exhaust.
$46.57
In Stock
Order within the next 4 hrs and your part ships today!
![Dryer Radiant Flame Sensor – Part Number: WP338906 Dryer Radiant Flame Sensor – Part Number: WP338906](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/11741429-1-S-Maytag-WP338906-Dryer-Radiant-Flame-Sensor.jpg)
Dryer Radiant Flame Sensor
PartSelect #: PS11741429
Manufacturer #: WP338906
This part senses the flame for heat allowing the gas valve to open.This flame sensor is three inches long and is used for many gas clothes dryers.This flame sensor assembly is made of both plastic and metal.
$60.91
In Stock
Order within the next 4 hrs and your part ships today!
![Igniter Kit – Part Number: 279311 Igniter Kit – Part Number: 279311](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/334180-1-S-Maytag-279311-Igniter-Kit.jpg)
Igniter Kit
PartSelect #: PS334180
Manufacturer #: 279311
This silicone carbide igniter with ceramic holder kit includes the 3" flat igniter, bracket, 4" wire leads, and the plug. It can replace both round and flat igniters. This kit is used for many gas clothes dryers.
$51.54
In Stock
Order within the next 4 hrs and your part ships today!
Questions And Answers for VGD6505GW0
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jeff
March 12, 2023
The timer does not tick anymore and doesn’t wind down/shut off. The dryer just keeps running and drying. The timer knob doesn’t move. Do you sell the timer for this Crosley dryer?
For model number VGD6505GW0
Hello Jeff, We are glad you asked! The Timer is PS11731365. We are pleased to have been able to help.
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
Common Symptoms of the VGD6505GW0
[Viewing 10 of 10]Noisy
Fixed by
these parts
these parts
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/346995_1_S.jpg)
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/11755850_1_S.jpg)
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/8691753_1_s.jpg)
Show All
Drum Not Spinning
Fixed by
these parts
these parts
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/346995_1_S.jpg)
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/11744884_1_s.jpg)
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/334304_1_S.jpg)
Show All
Too hot
Fixed by
these parts
these parts
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/11741405_1_S.jpg)
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/346995_1_S.jpg)
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/12070444_1_s.jpg)
Show All
Marks left on clothes
Fixed by
these parts
these parts
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/8691753_1_s.jpg)
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/334199_1_S.jpg)
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/11773177_1_s.jpg)
Show All
Door won’t close
Fixed by
these parts
these parts
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/11731583_1_S.jpg)
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/11756002_1_S.jpg)
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/11741661_1_S.jpg)
Show All
Not Heating
Fixed by
these parts
these parts
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/11741405_1_S.jpg)
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/334180_1_S.jpg)
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/11741429_1_s.jpg)
Show All
Heat stays on after drum has stopped
Fixed by
these parts
these parts
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/346995_1_S.jpg)
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/11741405_1_S.jpg)
Show All
Won’t Start
Fixed by
these parts
these parts
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/334304_1_S.jpg)
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/11750824_1_s.jpg)
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/11741405_1_S.jpg)
Show All
Will Not Start
Fixed by
these parts
these parts
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/334304_1_S.jpg)
Show All
Touchpad does not respond
Fixed by
these parts
these parts
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/346995_1_S.jpg)
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
intermittant heat
First I shut off the gas supply and disconnected the dryer vent and unpluged the unit so you can access the rear of the dryer. Then I removed the rear cover. This is where you will find your thermostats and fuses. Holding the new part next to the one to be replaced I transfer the wires one at a time so as not to get them mixed up, then unscrew the old part and install the new one. Insert a flat blade screwdriver under the top cover in the 2 front corners to unsnap it from it's clips, also at this time you need to remove the 2 screws that hold the upper part of the lint filter tube to the lid, then lift the lid to expose the drum ( I tilted the dryer back as far as the flex gas line would allow me to and rested the top lid against the wall without removing it, to many wires). Behind the front cover in the top right corner is the plug for the door switch,un-plug it and also there are 2 screws one in each corner. After that lift the front cover straight up and pull it away from the cabinet ( it has clips at the bottom to hold it in place). Reaching under the drum on the right side pull down on the belt tensioner and release the belt from the motor then you can remove the drum. Laying the drum down on it's front edge I removed the rear felt seal and took a piece of sand paper to rough up th old glue and clean off some of the felt that was still stuck to the drum. Following the directions from the seal package I put the glue around the edge of the drum and re-installed the new felt. This is a good time to clean out your dryer, while the glue sets up. A shop vac works the best, but be carefull not to suck up the money, it will help pay for the repair ( I found over a dollar in change ). At this time I also changed the coils on the gas valve, remove the 2 screws that hold the clamp and replace them one at a time. Re-install the drum with the belt on it, fold it and push it through the tensioner and put it on the motor pulley. rotate the drum to make sure that the felt is not kinked under itself, re-install the front cover bottom clips first, then the 2 screws and the plug for the door switch, pull down the lid and snap it in place, before installing the rear cover this is a good time to remove the rear cover to the lint chute and clean in there also ( it's easy to see why there are so many dryer fires). Re- install that cover and the rear cover and vent tube, turn your gas back on and check it for leaks ( even if you didn't disconnect it) plug your dryer back in and get busy catching up on the laundry that you haven't had a chance to do because your dryer broke, then smile and think about all the money you saved by doing this simple repair your self. Thanks Parts Select
Parts Used:
-
Paul from Monmouth, IL
-
Difficulty Level:Easy
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers
480 of 531 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken tumbler belt
1. Removed the screws from the lint catcher
2. Removed the bolts from upper rear of dryer
3. Pried off the dryer top from the front (it rests on rear hinges)
4. Disconnected dryer door wiring
5. Removed bolt from inside upper front corners; removed front panel (be careful: the edges are sharp and the tumbler will fall when it loses support)
6. Removed broken belt and lint from interior parts; removed tensioner (which had fallen out of place). Note: The newer models have a tensioner pulley; my older model had a smooth semicircle that was confusing at first glance
7. Flipped dryer onto its back (for easier reinsertion of new belt and tumbler)
8. Placed new belt on tumbler; reinserted tumbler
9. Inserted new belt through tensioner, inserted tensioner "legs" into grooves on floor. Note: The belt will pull the tensioner upright when it's inserted properly (which isn't obvious at first)
10. Made sure belt and tumbler seal were properly installed
11. Replaced parts in reverse order
The process took over an hour because I couldn't figure out how to insert the belt through the tensioner. The trick is to insert the folded belt through the tensioner and onto the motor pulley. If I had to do it again, it would take about 30 minutes (including cleaning lint)
2. Removed the bolts from upper rear of dryer
3. Pried off the dryer top from the front (it rests on rear hinges)
4. Disconnected dryer door wiring
5. Removed bolt from inside upper front corners; removed front panel (be careful: the edges are sharp and the tumbler will fall when it loses support)
6. Removed broken belt and lint from interior parts; removed tensioner (which had fallen out of place). Note: The newer models have a tensioner pulley; my older model had a smooth semicircle that was confusing at first glance
7. Flipped dryer onto its back (for easier reinsertion of new belt and tumbler)
8. Placed new belt on tumbler; reinserted tumbler
9. Inserted new belt through tensioner, inserted tensioner "legs" into grooves on floor. Note: The belt will pull the tensioner upright when it's inserted properly (which isn't obvious at first)
10. Made sure belt and tumbler seal were properly installed
11. Replaced parts in reverse order
The process took over an hour because I couldn't figure out how to insert the belt through the tensioner. The trick is to insert the folded belt through the tensioner and onto the motor pulley. If I had to do it again, it would take about 30 minutes (including cleaning lint)
Parts Used:
-
Michael from San Antonio, TX
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Wrench set
134 of 154 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Make humming noise when pressing start button. Would not start
After looking on the website for advice I walked throught the simple steps of disassembling the front, removing the drum, removed the back, disconnected the wire harness. Then removed the blower housing in the back. The blower, mounted on the back side of the motor was very tight. I used a pipe wrench wedged in place and help by my 10 year old Grand-daughter while I used an adjustable wrench to turn the shaft on the front of the motor. Spun the blower off, removed the two clips holding the motor. Then reversed the process when I received the new motor. Care should be taken to avoid damaging the blower fan if a lot of pressure is required.
Parts Used:
-
James from Moscow, IA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
95 of 109 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!