We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Rony
October 31, 2022
I am looking for the wiring for ignition goes on all the gas valves, turn the knob and the igniter works makes the burner light up
For model number LSG4511ST
Hello Rony, thank you for contacting us. We have researched the model you have provided and have found that the part you are looking for is part number PS12581326. If you would like assistance placing an order, please contact customer service. Good luck with your repair!
I am looking for knobs all 6 of them of the above model
For model number LSG4511ST
Hi Roopa, thank you for getting in touch. The parts you are looking for are the surface burner knob, part number PS11760696, and the oven selector knob, part number PS12078417. You will need one oven selector knob and five surface burner knobs. We hope this information is useful!
Took off the oven door then took out the racks and two screws in the oven bottom and removed it . Then removed the heat deflector. Then un plugged the old igniter and removed the burner to make it easier to remove the old igniter. Then installed the new igniter and reversed the process
As soon as my husband put it in the oven, the very thin prongs broke. There was no guard on either side of the prongs for protection like the one that had been in there. Very costly to us of $185 with no fix. Very disappointed in that ignitor. It would have been an easy fix. Had replaced one previously but it only lasted 6 months. Now we have a new stove
