We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Allan
February 23, 2024
Does the cooktop come with the replacement front gasket or is that a separate order number? or are they assuming that the old rubber gasket remain in place? We have a chunk out and would like to replace it when replacing the cooktop. I cannot find a part number for just the rubber seal.
For model number LSE4613ST
Hi Allan, thank you for your inquiry. The cooktop does not come with the gasket. It is sold separately. The compatible front gasket for the cooktop is part number PS11761879. We hope that helps!
Hi Paulette, thank you for contacting us. If the bottom element in your oven is not working, we suggest that you check the temperature sensor, part number PS11732697, the control board, part number PS11761303, and the bottom oven element. If you require assistance to place an order, please contact customer service. We hope that helps!
Knob to oven broke off. It has a plastic attachment and is not the same type of knob as the top heating elements. I cannot find the replacement part number. Please help. Currently using pliers to turn plastic piece to bake anything.
For model number LSE4613ST
Hi Michael, thank you for the question. The oven knob compatible with your model is part number PS11760698. We hope this helps!
What needs to be ordered to replace the oven control where the stem that holds the k ob is broken. How many parts please?
For model number LSE4613ST
Hello Steven, thank you for the question. According to our understanding, you may need to replace the front panel assembly, part number PS11760784. If you require assistance to place an order, please contact customer service!
Go onto youtube, such as https://www.youtube.com/watch?v=-ITkrwhDNMQ and watch similar videos for DYI. The process is very similar to other models.
Once the door is removed, place oven door on a towel or soft place so it does not scratch the door. Unscrew the screws and make sure you notice where each screw goes, so you know the process of where each screw goes when you re-assemble.
Once the inner cover is removed, remove the insulation, too so you don't damage it. Use Wet/Dry Shop Vac to clean the shattered glass. (WORD OF ADVICE: I did not remove the insulation and the suction of the Shop Vac removed part of the insulation, so now instead of a quick turn around repair turns into a few weeks repair, because the insulation is on back order 10-14 days from the supplier. DON"T MAKE THE SAME MISTAKE!)
Once the glass has been removed, the new inner glass is replaced, begin by re-assemble the oven door with the correct screws and attached the oven door to the range.
We had made this determination with the help of a repairman on the phone. I ordered the part and waited for it. It was stuck in West Virginia. After several days after it was expected a repairman fixed my range to the tune of $168. It should have cost $30 (the cost of the part and shipping). Unfortunately I probably won't order from PartSelect again.
