We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Richard
November 7, 2022
Our display is not working properly, parts of the numbers are not visible. Do we have to replace the unit?
For model number LRG3193ST
Hello Richard, thank you for getting in touch. No, you do not have to replace the whole unit, as it seems like the control panel is faulty and needs to be replaced. The part number for the control panel is PS12580239. If you require assistance to place an order, please get in touch with customer service. We hope that helps!
Two burner ignitors do not light the stove. What has to be done to get them to work? Do they need to be replaced?
For model number LRG3193ST
Hi Ben,
Thank you for your question. If two of the burners on top of the stove are not lighting, you will need to check the spark ignition switches and wire harness, the electrodes, and the spark module. Once you have determined the part you need, please call customer service. We look forward to hearing from you!
The oven will not hold temp or some time take a long time to come up to temp.. Example cooking a cake set the oven to 350 degrees.. Half hour later the cake should be done but it not turn the oven off and back on and the degree are at 150
For model number LRG3193ST
Hi Lance, thank you for contacting us. According to our research, we recommend checking the temperature sensor, part number PS11732697. If it is faulty, replace it. If this does not solve your problem, the ignitor, part number PS3535362, is probably the issue and needs to be replaced. We hope that helps!
I have a gas convection oven . The clock on the control panel doesn’t work I can not tell the time or the temperature of the oven
For model number LRG3193ST
Hello Sam, thank you for the question. Based on our understanding of the issue, we would suggest checking the control panel assembly, part number PS12580239. If this is faulty, replace it. We hope this solves your problem!
I NEED A EW SCREEN FOR THE CONTROL PANEL. THE OLD ONE IS MELTED.
For model number LRG3193ST
Hi Daniel, thank you for reaching out. According to our research, you may need to replace the control panel assembly, part number PS12580239, to fix the issue. We hope that helps!
Took off the oven door then took out the racks and two screws in the oven bottom and removed it . Then removed the heat deflector. Then un plugged the old igniter and removed the burner to make it easier to remove the old igniter. Then installed the new igniter and reversed the process
As soon as my husband put it in the oven, the very thin prongs broke. There was no guard on either side of the prongs for protection like the one that had been in there. Very costly to us of $185 with no fix. Very disappointed in that ignitor. It would have been an easy fix. Had replaced one previously but it only lasted 6 months. Now we have a new stove
After consulting with multiple specialists, watching several videos/ tutorials online and trying multiple cleaning tools. They all coincided that if the stove was not wet and it is making that noise, It could be a problem with a switch board or the computer of the range. Ordering the part was the easiest part (and trust me, i am not a fixer or an expert on doing any repairs). However, PartSelect offers you precise parts if you know what you are looking for and have the correct model. The problem? Well, LG and Samsung ranges are known for their cook top being hard to dismantle and you need to remove a few pieces before you can get under the knobs where the switch boards are. It took a lot of time to just do that. The connection is a bit complex and I would suggest to leave it for an expect to do it. I must say this… i am glad that i have tried to work on the switch board before i started ordering parts that I did not need. I have over 5 hours with the range plugged, since i have switched the switch board and so far, it is not making that clicking sound. Ps. An expert was charging me from $180-250 to do an inspection and to order the part I needed and an extra fee for installing it. I certainly saved some money by just doing it myself.
