The dishwasher roller assembly connects to the dishrack, and is located in the lower level of the dishwasher. It allows the dishrack to easily slide in and out. If the lower rack keeps falling off the...
This part is the replacement inlet valve for your dishwasher. It is approximately 4-1/2 inches by 3-1/2 inches. The water inlet valve in your dishwasher connects to the water source and solenoid wire...
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
6 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Richard
September 1, 2022
Need mother board
For model number LDF5545BD
Hello Richard, thank you for your question. The Board is part PS16621815. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
I opened the door not once but twice while it was running and now it will not work. I have unplugged it and tried to reset it and nothing helps or resolves the issue. I’m thinking that it’s where you close the door and it makes connection to the front panel, that I messed it up. Could it be the brain is messed up now or what do I have to do to repair it?
For model number LDF5545BD
Hi Richard, thank you for your inquiry. Based on the description, the issue is with the door latch, part number PS12580257. You may need to replace the door latch to fix the issue. We hope this solves your problem!
LG dishwasher will not drain out the water. What part will I need to replace.
For model number LDF5545BD
Hello Theresa, thank you for your inquiry. Based on our understanding of the issue, we would suggest checking the drain hose and the filter. If they are not clogged, then you may need to replace the drain pump, part number PS12076726, to fix the issue. We hope that helps!
I need the adjustable top dish rack replaced. It has 2 places that are broken & rusted through. What is the part number please.
For model number LDF5545BD
Hi Lesa,
Thank you for your question. The part number listed under your model number for the upper dishrack is PS12749078. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
Part Replacement: Repair was quick and easy, requiring small Phillips screw driver, multimeter, flashlight/light source, (gloves and safety glasses optional). Steps:
1. Turn off power to dishwasher at breaker box. 2. Remove any screws securing DW to cabinet and slide out DW (about 12-18 inches) to expose switch (located on the very top exterior front). 3. Remove thin plastic cover sheet held in place by one Phillips screw. 4. Test for ac power or if unsure about turning off DW power. 5. Unplug two wiring assemblies (left and right side of old part). 6. Remove two small Phillips screws holding part to DW. (Tip- put a large towel/drop cloth down below screw location to catch screws should they fall.) 7. Manipulate the old part out (jiggle, twist, slide backwards, etc.) 8. Install new part and follow above instructions in reverse order. 9. Test DW.
Hope these instructions are helpful. Best of luck on your project!
Ordered the roller from Parts Select, slid the roller over the little spindle sticking out of the bottom rack and snapped it in place. Job done in less than one minute.
