JP326CV2BC General Electric Cooktop - Instructions

John from San Ramon, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

492 of 502 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Burner bowls needed replacement

Very easy repair, Pulled burner coil out, removed old burner bowl. Put in new burner bowl, plugged burner coil back in... easy as 1,2,3

Parts Used:

Tom from North Prairie, WI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

484 of 501 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Burner Bowl Needed Replaced

Removed burner element and put in bowl

Parts Used:

Stephen from Knoxville, TN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

521 of 685 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

The stove's bowl were burned and a mess.

Pulled out burner and put new bowls in. Looks like a new stove!

Parts Used:

Martin from Tewksbury, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

219 of 436 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Replaced old drip bowls

Took 5 minutes to replace the 4 bowls. Ordered the bowls one day & they arrived the next day All went perfect.

Parts Used:

John from Eowell, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

217 of 436 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

There was no heat on the coils.

I opened the lid, and found that the terminal blocks were burnt, the wires were melted. I ordered one set of terminal block to replace the burnt one, and it worked. Before I started, I shut off the electricity in the whole house to be safe.

Parts Used:

Surface Burner Terminal Block Kit

Shaohui from East Lansing, MI
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers

48 of 52 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

bottom of heating element corroded

PartsSelect is the BEST!! This is the second time I've had to use them on home appliances. Their web site was easy to use, shipping was fast, prices competitive and instructions very easy to follow. I would not hesitate to use them again. Very happy with service from the get-go.

Parts Used:

B. from Seattle, WA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

66 of 129 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Replacement of Coils

Removed by slightly wiggling out of the coupling. No tools needed, seriously, (and I'm a contractor). Basically, pull out and snap back in.

Parts Used:

Joseph from South Plainfield, NJ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

35 of 42 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Surface burner coil did not work.

TURN OFF ALL POWER TO KITCHEN. Took off all burner coils and plates below them. Lift hood. Locate part. Remove old part and replace with new part in same way as was previously installed. The wire that comes with the kit is actually too much wire, but just arrange it the best you can and leave it....no big deal. I didn't have a magnet, but needed one. The wire from burner coil to switch runs through a harness which is screwed on to the body of the oven (below the range). Be careful NOT to drop it behind oven when taking it out. I dropped it and took forever to get it. That turned a 20 minuate job into an hour and a half. Otherwise this is an easy job that anyone can do. Refrigerator compressor is next. Have fun.

Parts Used:

Surface Burner Terminal Block Kit

Gregory from Mont Belvieu, TX
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers, Socket set

23 of 33 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

broken knob on gas range

pulled off old knobs and replaced with new knobs.
Only one was broken, but wanted all of them to match so ordered enough for entire range. Worked perfectly. Looks great!

Parts Used:

Surface Burner Knob

Carole from Grand Haven, MI
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins

8 of 12 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

I had to replace my drip pans as well as the heating elements on all four burners

Very simple to replace, pull off the old element and push in the new one. Not only was it super easy, part select was so easy to work with. I had placed the order wrong, and immediately called customer service. They cancelled my order and placed the new one, refunding my money within 2 business days for the wrong order. Courteous, friendly and prompt. I would highly recommend them! Oh, I forgot to mention that the parts actually fit perfectly, unlike drip pans bought elsewhere. Thank you, Sincerely, Cindy

Parts Used:

Cindy from Moreno Valley, CA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

4 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Surface Burners were very slow.

Removed old surface burners and replaced them by plugging in the new surface burners. Now they work GREAT! Parts ordered and received with-in 3 business days. Fed EX delivered parts in good order very quickly. We recommend PartSelect.com

Parts Used:

Fisher from Fort Collins, CO
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

4 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

The burner bowls were burnt through and nasty looking.

I carefully removed the burners, removed the bowls and replaced them with the new ones. Easy as pie!

Parts Used:

Isabel from The Colony, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

In My Carelessness, I Ruined The Burners On My Stove Using A Really Abrasive Cleaner, And Had To Replace Them With New Ones. My Stove Looks Brand New, And I Feel Better!!

Nothing to it. Took off the old ones and put on the new! Tada - new stove!!

Parts Used: