Models
>
HDI8054U
HDI8054U (04) Bosch Range - Overview
Sections of the HDI8054U
[Viewing 8 of 8]Keep searches simple, eg. "belt" or "pump".
SHELF
PartSelect #: PS9495699
Manufacturer #: 00798845
$72.69
In Stock
Order within the next 1 hr and 29 mins and your part ships today!
LAMP
PartSelect #: PS8728930
Manufacturer #: 00623710
$9.78
In Stock
Order within the next 1 hr and 29 mins and your part ships today!
Bake Element
PartSelect #: PS9495682
Manufacturer #: 00791650
$118.33
In Stock
Order within the next 1 hr and 29 mins and your part ships today!
SENSOR
PartSelect #: PS10057828
Manufacturer #: 00630873
$59.49
In Stock
Order within the next 1 hr and 29 mins and your part ships today!
SCREW
PartSelect #: PS8727624
Manufacturer #: 00612818
$9.89
In Stock
Order within the next 1 hr and 29 mins and your part ships today!
KNOB-COOKING AREA
PartSelect #: PS9495599
Manufacturer #: 00632515
$79.91
In Stock
Order within the next 1 hr and 29 mins and your part ships today!
DISPLAY MODULE
PartSelect #: PS12742171
Manufacturer #: 12029207
$253.84
In Stock
Order within the next 1 hr and 29 mins and your part ships today!
GLASS PANEL
PartSelect #: PS9495679
Manufacturer #: 00791632
$212.41
In Stock
Order within the next 1 hr and 29 mins and your part ships today!
Rubber Feet - Kit of 4
PartSelect #: PS11728745
Manufacturer #: 00637940
$69.39
In Stock
Order within the next 1 hr and 29 mins and your part ships today!
SLIDE
PartSelect #: PS12587595
Manufacturer #: 12024638
$106.57
In Stock
Order within the next 1 hr and 29 mins and your part ships today!
LENS
PartSelect #: PS8710323
Manufacturer #: 00414513
$31.30
In Stock
Order within the next 1 hr and 29 mins and your part ships today!
Questions And Answers for HDI8054U
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the HDI8054U
[Viewing 2 of 2]Gas igniter glows, but will not light
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Need to replace bake element
First, cut the power and remove the oven from the cabinet.
The bake element is accessible from the back and sits in a drawer.
As someone else said, you have to use pliers to bend the cover of the drawer, you will make some damage to the cover, but there is nothing you can do about it.
Make a note of what wire goes to the right and to the left so you can plug them back like it was before.
When you replace the bake element, make sure you insert it in the straps so it won't wiggle when it heats.
To close the cover that you bent, you will need a helper and push really hard.
The bake element is accessible from the back and sits in a drawer.
As someone else said, you have to use pliers to bend the cover of the drawer, you will make some damage to the cover, but there is nothing you can do about it.
Make a note of what wire goes to the right and to the left so you can plug them back like it was before.
When you replace the bake element, make sure you insert it in the straps so it won't wiggle when it heats.
To close the cover that you bent, you will need a helper and push really hard.
Parts Used:
-
Ludovic from MIAMI BEACH, FL
-
Difficulty Level:Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers
3 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Control panel would randomly flicker, fade to black or become non-responsive when subjected to the heat/steam of the open range.
Watch the YouTube video.
Turn off power or unplug the range.
Remove 5 gas control knobs.
Remove four T20 screws on Control panel. one on each end, L and R, two underneath, L and R.
Pull off control panel and carefully flip it up onto the range, being careful not to stretch the wiring harness.
Carefully remove two wiring connectors (pinch and pull method)
Remove four T20 screws securing the Control panel mount then turn it over 180 degrees.
Straighten the mounting tabs until the control panel easily slides off of its mount.
Remove and replace the control panel and sheet.
Reverse the procedure to reinstall.
It took me longer to clean the components and the area that to repair the problem.
Tip: Isopropyl alcohol in a spray bottle and a cloth cuts the grease and grime, if needed, with very little effort and no scratching.
Turn off power or unplug the range.
Remove 5 gas control knobs.
Remove four T20 screws on Control panel. one on each end, L and R, two underneath, L and R.
Pull off control panel and carefully flip it up onto the range, being careful not to stretch the wiring harness.
Carefully remove two wiring connectors (pinch and pull method)
Remove four T20 screws securing the Control panel mount then turn it over 180 degrees.
Straighten the mounting tabs until the control panel easily slides off of its mount.
Remove and replace the control panel and sheet.
Reverse the procedure to reinstall.
It took me longer to clean the components and the area that to repair the problem.
Tip: Isopropyl alcohol in a spray bottle and a cloth cuts the grease and grime, if needed, with very little effort and no scratching.
Parts Used:
-
Alan from COLUMBUS, NJ
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver, Pliers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
We bought a 2nd hand stove and converted it from gas to propane
Followed the simple directions. This site was half the price of Bosch for parts and had them in stock.
Parts Used:
-
Lauren from YAMHILL, OR
-
Difficulty Level:Very Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!