This part number matches the current model number GFC520V
PartSelect #: PS12725430
Manufacturer #: GFC520N
1/2 Horsepower Motor Large Capacity Continuous Feed Disposer 2600 RPM Grinding Action Stainless Steel Jam Resistant, Dual Swivel Impellers EZ Mount Installation Direct Wire Power Connection Warranty
The cushion mount forms a watertight seal between the garbage disposal neck and the mounting ring. It is made of black plastic and measures approximately 4.5 inches in diameter and is 0.125 inches thi...
This is an elbow outlet and gasket for a food waste disposer or garbage disposer. This part connects the disposer to the drain pipe in your home. If you notice a blockage or a leak, you may need to re...
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Anthony
July 18, 2023
where do I place the allen key to move stuck disposal
For model number GFC520V
Hello Anthony, thank you for the great question. According to our research, on the underside of the garbage disposal in the center, there is a small round hole in the motor housing where our hex key fits. Insert the 1/4 inch hex key and move it back and forth to free the impeller. It should turn freely after the obstruction is cleared. We hope this information helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
The splash guard for the disposer was deteriorating and kept falling into the disposer and getting chewed up making it even less reliable. I purchased two different 'universal' splash guards at the hardware store. Neither of them fit. I finally crawled under the sink with my eyeglasses and a flash light to find the model number. I searched for the model number on part select and received veery quickly. I just popped it in (less than a minute) and now everything is wonderful. Don't buy a new disposer (my wife wanted me to) buy the replacement part that is giving you trouble at PartSelect!