Models
>
GCG1200S6BW
GCG1200S6BW General Electric Trash Compactor - Overview
Sections of the GCG1200S6BW
[Viewing 5 of 5]Keep searches simple, eg. "belt" or "pump".
![Power Nut Kit – Part Number: WP9870163 Power Nut Kit – Part Number: WP9870163](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/11747554-1-S-GE-WP9870163-Power-Nut-Kit.jpg)
Power Nut Kit
PartSelect #: PS11747554
Manufacturer #: WP9870163
Includes everything pictured above.
$95.26
In Stock
Order within the next 4 hrs and your part ships today!
![Compactor Bags - Package of 12 – Part Number: WC60X5017 Compactor Bags - Package of 12 – Part Number: WC60X5017](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/258002-1-S-GE-WC60X5017-Compactor-Bags-Package-of-12.jpg)
Compactor Bags - Package of 12
PartSelect #: PS258002
Manufacturer #: WC60X5017
These bags will fit all fifteen inch rectangular trash compactors.
$114.34
Special Order
![Bag Carrier – Part Number: WC36X10015 Bag Carrier – Part Number: WC36X10015](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/257772-1-S-GE-WC36X10015-Bag-Carrier.jpg)
Bag Carrier
PartSelect #: PS257772
Manufacturer #: WC36X10015
This part holds the trash compactor bag to make taking out the trash without worrying about tearing the bag.
* This part also comes with the 2 handles.
No Longer Available
Questions And Answers for GCG1200S6BW
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the GCG1200S6BW
[Viewing 2 of 2]Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
trash compactor ram not moving - broken plastic drive gear
1) pulled the compactor from under the counter and unplugged it. 2) tipped it on its side 3) removed 5 screws (3 on the motor side and two on the bottom) an took off the bottom cover plate. 3) using the pliers i pulled of the retainer clip from the large drive gear(it had broken on only the hub remain attached) 4) i then just slid in the new gear, snapped in the retainer clip and buttoned up the cover plate. Note I did not replace the other parts that came in the package because the existing ones seemed ok.
Parts Used:
-
william from andover, MA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Pliers
16 of 22 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
locking nut was stripped
After calling a repair man and being told my appliance was to old for him to repair I discovered your website. I simply entered the model number and a picture of the part I was looking for was easily found. I ordered online and received the replacement parts 5 day's later. I simply swapped out the old locking nuts with the new ones from your website and the repair was complete. What could have been an easy $100 repair cost a fraction of that and the trash compactor is working just fine.
Parts Used:
-
Tim from Bigfork, MT
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
12 of 18 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
dent in front panel
Really easy. Two screws on the back side. Loosen them and pull the top off. Panel slides right out from the top.
Parts Used:
-
James from Porter Ranch, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!