Models
>
FPCE22VWFF2
FPCE22VWFF2 Frigidaire Refrigerator - Overview
Sections of the FPCE22VWFF2
[Viewing 9 of 9]Keep searches simple, eg. "belt" or "pump".
![Defrost Timer - 60Hz 120V – Part Number: 215846602 Defrost Timer - 60Hz 120V – Part Number: 215846602](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/423801-1-S-Frigidaire-215846602-Defrost-Timer-60Hz-120V.jpg)
Defrost Timer - 60Hz 120V
PartSelect #: PS423801
Manufacturer #: 215846602
This defrost timer will cycle for thirty minutes after every eight hours of run time.
$49.11
In Stock
![Light Bulb – Part Number: 316538904 Light Bulb – Part Number: 316538904](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/12751166-1-S-Frigidaire-316538904-Light-Bulb.jpg)
Light Bulb
PartSelect #: PS12751166
Manufacturer #: 316538904
Clear, 120 Volt, 40 Watt.
$25.08
In Stock
![Defrost Thermostat – Part Number: 5303917954 Defrost Thermostat – Part Number: 5303917954](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/469269-1-S-Frigidaire-5303917954-Defrost-Thermostat.jpg)
Defrost Thermostat
PartSelect #: PS469269
Manufacturer #: 5303917954
This limiter thermostat cuts out when the temperature inside your refrigerator reaches 55 degrees Fahrenheit and kicks back in when the internal temperature drops to 20 degrees Fahrenheit.
$33.65
In Stock
![Evaporator Fan Motor Kit – Part Number: 5300158289 Evaporator Fan Motor Kit – Part Number: 5300158289](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/450319-2-S-Frigidaire-5300158289-Evaporator-Fan-Motor-Kit.jpg)
Evaporator Fan Motor Kit
PartSelect #: PS450319
Manufacturer #: 5300158289
This motor runs the evaporator fan in your refrigerator. It is mounted on the center hub and has three lead wires terminals. This motor rotates in a clockwise fashion. Its shaft has a diameter of 1/8" and is 1-1/4" long.
$149.43
In Stock
![Hexagonal Screw – Part Number: 241710601 Hexagonal Screw – Part Number: 241710601](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/1526503-1-S-Frigidaire-241710601-Hexagonal-Screw.jpg)
Hexagonal Screw
PartSelect #: PS1526503
Manufacturer #: 241710601
Sold individually.
$16.47
In Stock
![Light Switch – Part Number: 5303289051 Light Switch – Part Number: 5303289051](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/461251-1-S-Frigidaire-5303289051-Light-Switch.jpg)
Light Switch
PartSelect #: PS461251
Manufacturer #: 5303289051
This part turns the light on/off as the door opens and closes.
$31.17
In Stock
![Filter - Drier – Part Number: 5303305677 Filter - Drier – Part Number: 5303305677](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/464532-1-S-Frigidaire-5303305677-Filter-Drier.jpg)
Filter - Drier
PartSelect #: PS464532
Manufacturer #: 5303305677
Refrigerant system filter/dryer.
$20.11
In Stock
![Door Hinge Pin Bearing – Part Number: 218519300 Door Hinge Pin Bearing – Part Number: 218519300](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/428213-1-S-Frigidaire-218519300-Door-Hinge-Pin-Bearing.jpg)
Door Hinge Pin Bearing
PartSelect #: PS428213
Manufacturer #: 218519300
This white hinge pin bearing pivots the freezer and refrigerator door.
$18.96
Special Order
![Hex Head Screw – Part Number: 5304455650 Hex Head Screw – Part Number: 5304455650](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/1532376-1-S-Frigidaire-5304455650-Hex-Head-Screw.jpg)
Hex Head Screw
PartSelect #: PS1532376
Manufacturer #: 5304455650
Sold individually.
$17.34
In Stock
Questions And Answers for FPCE22VWFF2
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the FPCE22VWFF2
[Viewing 13 of 13]Fridge too warm
Fixed by
these parts
these parts
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/423801_1_S.jpg)
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/469269_1_s.jpg)
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/450319_2_s.jpg)
Show All
Freezer not defrosting
Fixed by
these parts
these parts
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/423801_1_S.jpg)
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/469269_1_s.jpg)
Show All
Freezer section too warm
Fixed by
these parts
these parts
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/423801_1_S.jpg)
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/469269_1_s.jpg)
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/450319_2_s.jpg)
Show All
Noisy
Fixed by
these parts
these parts
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/450319_2_s.jpg)
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/473177_1_s.jpg)
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/423801_1_S.jpg)
Show All
Light not working
Fixed by
these parts
these parts
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/3655096_1_S.jpg)
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/461251_1_s.jpg)
Show All
Leaking
Fixed by
these parts
these parts
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/423801_1_S.jpg)
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/2349464_1_S.jpg)
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/469269_1_s.jpg)
Show All
Fridge runs too long
Fixed by
these parts
these parts
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/423801_1_S.jpg)
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/469269_1_s.jpg)
Show All
Will Not Start
Fixed by
these parts
these parts
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/423801_1_S.jpg)
Show All
Fridge and Freezer are too warm
Fixed by
these parts
these parts
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/423801_1_S.jpg)
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/469269_1_s.jpg)
Show All
Freezer too cold
Fixed by
these parts
these parts
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/423801_1_S.jpg)
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/469269_1_s.jpg)
Show All
Fridge too cold
Fixed by
these parts
these parts
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/423801_1_S.jpg)
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/469269_1_s.jpg)
Show All
Frost buildup
Fixed by
these parts
these parts
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/423801_1_S.jpg)
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/469269_1_s.jpg)
Show All
Too warm
Fixed by
these parts
these parts
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/423801_1_S.jpg)
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/469269_1_s.jpg)
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Fridge got warm and freezer coils were frosted
Fridge is a side by side. The freezer is pretty narrow for a guy with wide shoulders.
Pulled plug.
Had to remove bottom drawers then used nut driver to remove screws closest to back wall in drawer runners. Once the back screws were removed the runners could be swung up or down out of way so back cover could be removed.
Once back cover was removed thermostat was located attached to top pipe going into coil using a spring clamp.
Cut the wires just outside the crimp connectors going into thermostat. Released the spring clamp buy squeezing botton together.
Removed old badly corroded thermostat.
I wish I had attached the crimp connectors to the new thermostat wires before mounting it. Reaching way in the back, while turning shoulders verticly and trying to get the wire connectors set from both sides was awkward and uncomfortable...The biggest PIA of the whole task.
Once connected I let the fridge (thermostat) cool for 10 min. Turned the dial defrost timer to get it into defrost mode. Stupidly touched the heating element to see if it was getting warm...it was very hot.
Coils steamed...every looked like it was working. Unplugged, put back cover back on and retattached drawer mounts.
Plugged back in and everying is working great!
Pulled plug.
Had to remove bottom drawers then used nut driver to remove screws closest to back wall in drawer runners. Once the back screws were removed the runners could be swung up or down out of way so back cover could be removed.
Once back cover was removed thermostat was located attached to top pipe going into coil using a spring clamp.
Cut the wires just outside the crimp connectors going into thermostat. Released the spring clamp buy squeezing botton together.
Removed old badly corroded thermostat.
I wish I had attached the crimp connectors to the new thermostat wires before mounting it. Reaching way in the back, while turning shoulders verticly and trying to get the wire connectors set from both sides was awkward and uncomfortable...The biggest PIA of the whole task.
Once connected I let the fridge (thermostat) cool for 10 min. Turned the dial defrost timer to get it into defrost mode. Stupidly touched the heating element to see if it was getting warm...it was very hot.
Coils steamed...every looked like it was working. Unplugged, put back cover back on and retattached drawer mounts.
Plugged back in and everying is working great!
Parts Used:
-
Stephen from Warrington, PA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers, Screw drivers
337 of 401 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Noisy fan
1. Removed the 7 nuts using the nut driver from the freezer back panel inside the freezer.
2. Remove the back panel. The evaporator motor and fan are located above the coils.
3. Unplug the wiring harness.
4. Remove the two gold mounting screws holding the motor and fan in place.
5. Remove the motor and fan including the brackets.
6. Install the new motor and fan onto the mounting bracket.
6a. Attach the green ground to the mounting bracket.
7. Screw the two gold screws back into the freezer.
8. Attach the new wiring harness. Note, the old harness had a mounting hole/space for it to connect to the wiring harness of the freezer. The new motor's harness was not long enough for this, so it is connected freely to the freezer harness.
9. Use the hair dryer to melt any ice that may have formed on the coils and hole where the fan goes.
10. Turn the freezer on to see if the fan turns on.
11. Reinstall the back panel.
All done!
2. Remove the back panel. The evaporator motor and fan are located above the coils.
3. Unplug the wiring harness.
4. Remove the two gold mounting screws holding the motor and fan in place.
5. Remove the motor and fan including the brackets.
6. Install the new motor and fan onto the mounting bracket.
6a. Attach the green ground to the mounting bracket.
7. Screw the two gold screws back into the freezer.
8. Attach the new wiring harness. Note, the old harness had a mounting hole/space for it to connect to the wiring harness of the freezer. The new motor's harness was not long enough for this, so it is connected freely to the freezer harness.
9. Use the hair dryer to melt any ice that may have formed on the coils and hole where the fan goes.
10. Turn the freezer on to see if the fan turns on.
11. Reinstall the back panel.
All done!
Parts Used:
-
Jordan from Maumee, OH
-
Difficulty Level:Easy
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver
153 of 180 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Light socket melted around bulb
After unsuccessfully trying to change the blown light bulb I discovered that the plastic light socket had gotten so hot that it melted and permanently fused with the blown bulb. After my new socket arrived in the mail I just popped the temp control assembly out with a screw driver and removed the old socket and placed the new one in. Whole operation to 5 minutes.
Parts Used:
-
William from Alexandria, VA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
65 of 107 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!