Models
>
FDE648GFT0
FDE648GFT0 Frigidaire Dryer - Overview
Sections of the FDE648GFT0
[Viewing 6 of 6]Keep searches simple, eg. "belt" or "pump".
![Rear Drum Bearing Kit – Part Number: 5303281153 Rear Drum Bearing Kit – Part Number: 5303281153](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/459829-1-S-Frigidaire-5303281153-Rear-Drum-Bearing-Kit.jpg)
Rear Drum Bearing Kit
PartSelect #: PS459829
Manufacturer #: 5303281153
This kit includes one bearing, one ball shaft, one ball bearing, one ball bearing retainer, a small tube of high temperature lubricant, and installation screws.
$79.28
In Stock
![Drum Belt – Part Number: 134503600 Drum Belt – Part Number: 134503600](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/1148434-1-S-Frigidaire-134503600-Drum-Belt.jpg)
Drum Belt
PartSelect #: PS1148434
Manufacturer #: 134503600
This 88 3/4 inches long and 1/4 inch wide dryer drum belt goes around the dryer drum and the pulley to rotate the drum once the motor is activated.
$22.44
In Stock
![Upper Drum Glide – Part Number: 5303937139 Upper Drum Glide – Part Number: 5303937139](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/470317-1-S-Frigidaire-5303937139-Upper-Drum-Glide.jpg)
Upper Drum Glide
PartSelect #: PS470317
Manufacturer #: 5303937139
Front upper felt glide pad with 3 nylon glides - includes adhesive.
$51.09
In Stock
![Heating Element Assembly – Part Number: 131553900 Heating Element Assembly – Part Number: 131553900](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/418120-1-S-Frigidaire-131553900-Heating-Element-Assembly.jpg)
Heating Element Assembly
PartSelect #: PS418120
Manufacturer #: 131553900
This dryer heating and housing assembly has terminals at four o'clock. This E-line assembly comes with a felt strip and insulators already attached.
$216.14
In Stock
![Drum Support Bearing – Part Number: 131825900 Drum Support Bearing – Part Number: 131825900](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/418807-1-S-Frigidaire-131825900-Drum-Support-Bearing.jpg)
Drum Support Bearing
PartSelect #: PS418807
Manufacturer #: 131825900
This part attaches onto the inside of the rear panel of the cabinet.
$8.04
In Stock
![Thermal Limiter - Limit 220 – Part Number: 134120900 Thermal Limiter - Limit 220 – Part Number: 134120900](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/419402-1-S-Frigidaire-134120900-Thermal-Limiter-Limit-220.jpg)
Thermal Limiter - Limit 220
PartSelect #: PS419402
Manufacturer #: 134120900
This thermal fuse limiter, with a limit of 220 degrees Fahrenheit, is manufactured for both gas and electric clothes dryers. Once the internal temperature of the dryer reaches 220 degrees, the heating element cuts out.
$34.56
In Stock
![Front Lower Drum Seal – Part Number: 5303283286 Front Lower Drum Seal – Part Number: 5303283286](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/460194-1-S-Frigidaire-5303283286-Front-Lower-Drum-Seal.jpg)
Front Lower Drum Seal
PartSelect #: PS460194
Manufacturer #: 5303283286
This part helps to keep the dryer running as quietly as possible.
$53.74
On Order
![Door Catch – Part Number: 131658800 Door Catch – Part Number: 131658800](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/418433-1-S-Frigidaire-131658800-Door-Catch.jpg)
Door Catch
PartSelect #: PS418433
Manufacturer #: 131658800
This part helps keep the door closed while the machine is running.
$79.66
In Stock
![Lint Filter – Part Number: 131450300 Lint Filter – Part Number: 131450300](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/417841-1-S-Frigidaire-131450300-Lint-Filter.jpg)
Lint Filter
PartSelect #: PS417841
Manufacturer #: 131450300
This white dryer lint filter screen collects lint as it passes through the dryer vent.
$36.24
In Stock
![Door Strike – Part Number: 5303207102 Door Strike – Part Number: 5303207102](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/455020-1-S-Frigidaire-5303207102-Door-Strike.jpg)
Door Strike
PartSelect #: PS455020
Manufacturer #: 5303207102
"Male" piece of a dryer door closing mechanism.
$23.90
In Stock
![High Limit Thermostat – Part Number: 3204267 High Limit Thermostat – Part Number: 3204267](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/446428-1-S-Frigidaire-3204267-High-Limit-Thermostat.jpg)
High Limit Thermostat
PartSelect #: PS446428
Manufacturer #: 3204267
This high limit thermostat has a limit of 260 degrees Fahrenheit. Meaning that it will cut out when the internal dryer temperature reaches 260. This thermostat cuts back in when the temperature drops ...
$119.16
In Stock
![Screw – Part Number: 131302800 Screw – Part Number: 131302800](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/417463-1-S-Frigidaire-131302800-Screw.jpg)
Screw
PartSelect #: PS417463
Manufacturer #: 131302800
This is a replacement screw for your washer or dryer. The screw is approximately half an inch in length and is a Phillips-head screw. It screws in from the outside of the drum, into the vane/baffle. T...
$16.47
In Stock
Questions And Answers for FDE648GFT0
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the FDE648GFT0
[Viewing 6 of 6]Noisy
Fixed by
these parts
these parts
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/459829_1_S.jpg)
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/418807_1_S.jpg)
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/1148434_1_S.jpg)
Show All
Marks left on clothes
Fixed by
these parts
these parts
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/470317_1_s.jpg)
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/460194_1_S.jpg)
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/459829_1_S.jpg)
Show All
Door won’t close
Fixed by
these parts
these parts
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/418433_1_S.jpg)
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/455020_1_S.jpg)
Show All
Too hot
Fixed by
these parts
these parts
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/419402_1_S.jpg)
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/446428_1_s.jpg)
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/417453_1_s.jpg)
Show All
Drum Not Spinning
Fixed by
these parts
these parts
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/1148434_1_S.jpg)
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/459829_1_S.jpg)
Show All
Not Heating
Fixed by
these parts
these parts
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/418120_1_S.jpg)
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Squealing noise
We followed the instructions for the drum glide replacement and changed the belt and drum support bearing piece, cleaned it out too. Works like a charm. Thanks for saving us a bundle.
Parts Used:
-
Cynthia from Lexington, SC
-
Difficulty Level:Easy
-
Total Repair Time:1- 2 hours
-
Tools:Pliers, Wrench (Adjustable), Wrench set
529 of 551 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Loud Squeaking
1. Unplug dryer from outlet
2. Using Lg. flat screwdriver, pry under the front edge of the top and release two spring tabs
3. Lift up top and tilt back out of your way
4. Unscrew two phillips scews on inside of front panel
5. Lift up and out the front panel. Two spring clips at bottom.
6. Rlease tension on drum belt at the motor. Access panel at rear of dryer.
7.Unscrew 3 screws from inside, center rear of drum.
8. Remove drum through the front of the dryer. You may have to spread the sides apart a little bit for it to fit
9. Lift up on the rear drum bearing to remove it from the bearing retainer. ( U shaped plastic socket)
10. unsrew 2 screws and remove the bearing retainer, ground ball. Ball retainer is on outside of dryer.
11. Vacuum everything--duct, blower, lint trap, ect.
12. Intall new bearing retainer and grounding ball, an assistant is helpful at this time, one to hold ball retainer on rear of dryer, one to screw it in from the inside
13. reassemble remainder of parts in reverse order.
2. Using Lg. flat screwdriver, pry under the front edge of the top and release two spring tabs
3. Lift up top and tilt back out of your way
4. Unscrew two phillips scews on inside of front panel
5. Lift up and out the front panel. Two spring clips at bottom.
6. Rlease tension on drum belt at the motor. Access panel at rear of dryer.
7.Unscrew 3 screws from inside, center rear of drum.
8. Remove drum through the front of the dryer. You may have to spread the sides apart a little bit for it to fit
9. Lift up on the rear drum bearing to remove it from the bearing retainer. ( U shaped plastic socket)
10. unsrew 2 screws and remove the bearing retainer, ground ball. Ball retainer is on outside of dryer.
11. Vacuum everything--duct, blower, lint trap, ect.
12. Intall new bearing retainer and grounding ball, an assistant is helpful at this time, one to hold ball retainer on rear of dryer, one to screw it in from the inside
13. reassemble remainder of parts in reverse order.
Parts Used:
-
Frank from Boyertown, PA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
334 of 351 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
short circuit with a brasier metal support
Disconect the dryer from the main power source.
1) Remove the two screws from the rear / upper panel (below the control panel).
2) Snap the front side using a flat head screw driver.
3) On the inside front, remove two screws (one on each side) from the upper side and snap the door assembly off.
4) Remove the rear motor access panel (two screws) and appying tension to the spring remove the belt.
5) Pull the drum upwards (verticaly) unnapping it from the rear wall and remove it horizontally through the front panel.
6) Disconect the four leads to the heating element and remove the four screws from the rear of the dryer and replace the heating element.
Follow the same steps backwards to put the dryer together again.
1) Remove the two screws from the rear / upper panel (below the control panel).
2) Snap the front side using a flat head screw driver.
3) On the inside front, remove two screws (one on each side) from the upper side and snap the door assembly off.
4) Remove the rear motor access panel (two screws) and appying tension to the spring remove the belt.
5) Pull the drum upwards (verticaly) unnapping it from the rear wall and remove it horizontally through the front panel.
6) Disconect the four leads to the heating element and remove the four screws from the rear of the dryer and replace the heating element.
Follow the same steps backwards to put the dryer together again.
Parts Used:
-
Juan Carlos from Weston, FL
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
233 of 271 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!