Models
>
EW30ES6CGW1
EW30ES6CGW1 Electrolux Range - Overview
Sections of the EW30ES6CGW1
[Viewing 7 of 7]Manuals & Care Guides for EW30ES6CGW1
Click to downloadInstall
Installation Instructions
(9.27MB)
Manual
Owner's Manuals
(2.54MB)
Manual
Owner's Manuals
(33.24MB)
Specs
Product Specifications Sheet
(1.21MB)
Wiring
Wiring Diagram
(0.33MB)
Keep searches simple, eg. "belt" or "pump".
![Temperature Sensor – Part Number: 316217002 Temperature Sensor – Part Number: 316217002](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/820208-1-S-Frigidaire-316217002-Temperature-Sensor.jpg)
Temperature Sensor
PartSelect #: PS820208
Manufacturer #: 316217002
Also known as Probe. The quick connect on this part may be different than your original part. If it doesn't fit, you have to cut off the quick connect and wire together with porcelain wire nuts.
$72.47
In Stock
![Light Bulb – Part Number: 316538904 Light Bulb – Part Number: 316538904](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/12751166-1-S-Frigidaire-316538904-Light-Bulb.jpg)
Light Bulb
PartSelect #: PS12751166
Manufacturer #: 316538904
Clear, 120 Volt, 40 Watt.
$25.08
In Stock
![Main Terminal Block Kit – Part Number: 5304409888 Main Terminal Block Kit – Part Number: 5304409888](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/471605-1-S-Frigidaire-5304409888-Main-Terminal-Block-Kit.jpg)
Main Terminal Block Kit
PartSelect #: PS471605
Manufacturer #: 5304409888
Terminal blocks (also called terminal boards or strips) provide a convenient means of connecting individual electrical wires.
$11.93
In Stock
![Radiant Element with Limiter - 1200W – Part Number: 318178110 Radiant Element with Limiter - 1200W – Part Number: 318178110](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/1528719-1-S-Frigidaire-318178110-Radiant-Element-with-Limiter-1200W.jpg)
Radiant Element with Limiter - 1200W
PartSelect #: PS1528719
Manufacturer #: 318178110
$216.40
In Stock
![ELEMENT – Part Number: 5304533520 ELEMENT – Part Number: 5304533520](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/16763418-1-S-Frigidaire-5304533520-ELEMENT.jpg)
ELEMENT
PartSelect #: PS16763418
Manufacturer #: 5304533520
Dual Radiant Surface Element
$96.41
In Stock
![GLASS – Part Number: 5304503232 GLASS – Part Number: 5304503232](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/11728351-1-S-Frigidaire-5304503232-GLASS.jpg)
GLASS
PartSelect #: PS11728351
Manufacturer #: 5304503232
This is also called the heat barrier glass.
$194.33
In Stock
Questions And Answers for EW30ES6CGW1
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the EW30ES6CGW1
[Viewing 6 of 6]Element will not heat
Fixed by
these parts
these parts
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/1528719_1_s.jpg)
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/16763418_1_s.jpg)
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/820208_1_s.jpg)
Show All
Little to no heat when baking
Fixed by
these parts
these parts
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/820208_1_s.jpg)
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/471605_1_S.jpg)
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/3497886_1_S.jpg)
Show All
Oven is too hot
Fixed by
these parts
these parts
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/820208_1_s.jpg)
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/1991657_1_S.jpg)
Show All
Will Not Start
Fixed by
these parts
these parts
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/471605_1_S.jpg)
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/820208_1_s.jpg)
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/439060_1_S.jpg)
Show All
Oven not heating evenly
Fixed by
these parts
these parts
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/820208_1_s.jpg)
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/471605_1_S.jpg)
Show All
Little to no heat when broiling
Fixed by
these parts
these parts
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/471605_1_S.jpg)
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Oven not heating to desired temperature
Replaced clock control by removing surface burner control knobs and plastic nuts, and then the cover over the oven control. Two screw hold the clock in place, after removal and disconnecting the plug-in you can reinstall the new clock control. The Heat Sensor inside the oven will also need to be replaced. It is located inside the oven and attached with two screws; the back of the oven will need to be removed to unplug. Reverse removal procedure and turn the power back on to the stove.
Parts Used:
-
Dan from Bellevue, ID
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
151 of 233 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Cord was not tightened enough by delivery crew.
PF alarm appeared on display. Noticed clicking when cord was moved. Had arced for some time and melted original block. New part slightly different. Only has 3 lugs, old one had six. Stack using washers provided. Take note of colors before disassembly. Use caution while working through access opening. The edges are sharp. Only tools needed are phillips screwdriver, deep socket for lug nuts. Nut driver optional. Hope this is helpful.
Parts Used:
-
Timothy from Spring Valley, AL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
98 of 155 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
burned out burner
First we removed two screws under the rim of the range top to open the lid. Lifted the lid and removed the screws from the bracket that holds the elements, Be careful with the clips that hold the element in, if you break them or bend them there aren't any more! Also note which holes they were in, they are marked according to the different sizes of elements. Disconnected the wires, needed needlenose pliers to grip them...connected new element, popped it back in place, replaced bracket, closed top ...Easy peasy!!!
Parts Used:
-
Lori from Winter Haven, FL
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
67 of 87 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!