This manufacturer-approved air filter system for refrigerators eliminates odors and any impurities. It does this by neutralizing and removing odor-causing molecules. For best results, it is important ...
This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer. The run capacitor is attached to the compressor. This part is 120 volts a...
This 8-cube ice maker is used to create ice for your refrigerator. The ice maker receives water from the water inlet valve and will freeze until ice cubes are formed. Once the water has been frozen t...
When energized, the water inlet valve will release water from the supply line into the ice mold and the water dispenser in the refrigerator. If the ice maker is not making or dispensing ice, not disp...
This evaporator fan motor is located in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated.
Sold individually.
This is a genuine part. The handle mounting shoulder screw (no.10 ab) is made for use with many refrigerators. The metal screw helps to fasten the handle assembly to the outer do...
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Rick
December 17, 2023
The plastic housing on the door where the top hinge goes in crumbled causing the door to start tilting inward toward the center...
For model number EI32AF65JS1
Hello Rick, thank you for asking. The part you are looking for is top hinge bearing, part number PS10060181. We hope this helps!
Is there suppose to be any icing on the line coming from the condenser? I have ice on the foam insulation that's wrapped around the line.
My freezer stopped cooling so I unplugged it and noticed ice build up on the lower part of the freezer and clogged drain pipe. I defrosted it and cleaned everything, coils, fans, etc...
I plugged it back in and after about 15 minutes I noticed ice on the line which is at the bottom and back of the unit. The fan wasn't working then. I unclipped the thermostat that was clipped to another line, reinstalled it and the fan started working and the compressor worked too.
The freezer has been on for 48 hours and is -2°F inside. Still have slight icing on the line and now fan is not on. I did just unplug and plug back in and heard a few clicks coming from the compressor, but still no fan.
Also, I didn't notice a replacement thermostat for the one at the lower, rear. Only saw one for inside the freezer.
Much appreciated
For model number EI32AF65JS1
Hello Jeff, thank you for reaching out. Based on our research, the issue is most probably with the condenser fan motor, part number PS3497843. We would suggest replacing it to fix the issue. We hope this solves your problem!
Unplugged faulty ice maker, removed two screws holding it to the refrigerator and took it out. Reversed the operation with the new ice maker and after a few minutes presto, we have ice.
I had put in a new ice maker and it still had the problem, (I needed the Ice maker anyway) I installed the vale and while I was at it I put a five year filter on the water line that went from the value to the Ice maker, it took less than one hours, the ice is making like it did when it was new, I could not be more please at theis time. Thanks for your Interest. God bless.