Models
>
AGR5330BAB0
AGR5330BAB0 Amana Range - Overview
Sections of the AGR5330BAB0
[Viewing 8 of 8]Keep searches simple, eg. "belt" or "pump".
![Touch-Up Paint - White – Part Number: 72017 Touch-Up Paint - White – Part Number: 72017](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/385132-1-S-Maytag-72017-Touch-Up-Paint-White.jpg)
Touch-Up Paint - White
PartSelect #: PS385132
Manufacturer #: 72017
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$10.18
In Stock
![Oven Sensor – Part Number: WPW10181986 Oven Sensor – Part Number: WPW10181986](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/11749737-2-S-Maytag-WPW10181986-Oven-Sensor.jpg)
Oven Sensor
PartSelect #: PS11749737
Manufacturer #: WPW10181986
This temperature sensor detects the temperature within the oven cavity. This oven temperature sensor, for ranges, works together with the oven control board to measure and regulate the oven temperatur...
$120.35
In Stock
![Screw – Part Number: W11233072 Screw – Part Number: W11233072](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/12349731-2-S-Maytag-W11233072-Screw.jpg)
Screw
PartSelect #: PS12349731
Manufacturer #: W11233072
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
$26.43
In Stock
![Insulation – Part Number: WPW10208653 Insulation – Part Number: WPW10208653](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/11750415-1-S-Maytag-WPW10208653-Insulation.jpg)
Insulation
PartSelect #: PS11750415
Manufacturer #: WPW10208653
Oven Wrap Insulation.
$77.18
In Stock
![Rear Leveling Leg – Part Number: WPW10058460 Rear Leveling Leg – Part Number: WPW10058460](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/11748094-1-S-Maytag-WPW10058460-Rear-Leveling-Leg.jpg)
Rear Leveling Leg
PartSelect #: PS11748094
Manufacturer #: WPW10058460
Sold individually.
$14.06
In Stock
![Igniter-OVEN – Part Number: W10918546 Igniter-OVEN – Part Number: W10918546](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/11770066-1-S-Maytag-W10918546-Igniter-OVEN.jpg)
Igniter-OVEN
PartSelect #: PS11770066
Manufacturer #: W10918546
This flat style gas oven igniter has ceramic housing and comes with a connector.
$87.60
In Stock
![Screw – Part Number: WP3400832 Screw – Part Number: WP3400832](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/11741605-1-S-Maytag-WP3400832-Screw.jpg)
Screw
PartSelect #: PS11741605
Manufacturer #: WP3400832
This screw is sold individually.
$6.88
In Stock
![Burner Cap - Black – Part Number: WP98017461 Burner Cap - Black – Part Number: WP98017461](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/11747514-1-S-Maytag-WP98017461-Burner-Cap-Black.jpg)
Burner Cap - Black
PartSelect #: PS11747514
Manufacturer #: WP98017461
Sold individually.
$62.56
In Stock
Questions And Answers for AGR5330BAB0
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Frances
July 3, 2022
Can I buy the whole door?
For model number AGR5330BAB0
Hello Frances, thank you for your question. No, the doors on ranges are only sold in parts. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Common Symptoms of the AGR5330BAB0
[Viewing 7 of 7]Little to no heat when baking
Fixed by
these parts
these parts
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/11749737_2_s.jpg)
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/11770066_1_S.jpg)
Show All
Gas igniter glows, but will not light
Fixed by
these parts
these parts
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/11770066_1_S.jpg)
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/11747502_1_s.jpg)
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/11750430_1_s.jpg)
Show All
Oven is too hot
Fixed by
these parts
these parts
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/11749737_2_s.jpg)
Show All
Will Not Start
Fixed by
these parts
these parts
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/11770066_1_S.jpg)
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/11749737_2_s.jpg)
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/11750430_1_s.jpg)
Show All
Oven not heating evenly
Fixed by
these parts
these parts
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/11749737_2_s.jpg)
Show All
Element will not heat
Fixed by
these parts
these parts
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/11770066_1_S.jpg)
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/11749737_2_s.jpg)
Show All
Little to no heat when broiling
Fixed by
these parts
these parts
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/11749737_2_s.jpg)
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
temperature not accurate after 3 1/2 years of happy usage
Opened up the back of the stove. Unpluged the sensor. Replaced the sensor. Replace the back of the stove.
The sensor that has been replaced is not what is expected. After reading all of the instructions for adjusting the temperatures, the only temp that stays steady is when we first turn on the oven to 350 degrees. That stays steady but when I turn it to 400 it slowly goes up to 425 degrees.
The sensor that has been replaced is not what is expected. After reading all of the instructions for adjusting the temperatures, the only temp that stays steady is when we first turn on the oven to 350 degrees. That stays steady but when I turn it to 400 it slowly goes up to 425 degrees.
Parts Used:
-
Ruth from Oregon, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
139 of 248 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
our oven would not heat up
My husband pulled out the stove turned the gas off then he pulled out the part and replaced igniter....it took only about 20 min to do this job it was very easy and prior to us doing ourselves i called a well known company that does home repairs, I also called a few smaller businesses and to replace this part was anywhere from $175- 250 if not more. we are very very happy with our decision to replace the part ourselves unstead of spending extra money we didnt have .
Parts Used:
-
sharnette from baltimore, MD
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
91 of 104 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
mice had made nests in the insulation wrap in the range
I numbered every part. ex: 1 L., for first part removed left side. I used a magic marker to circle the holes and wrote the number of screws used on the part, set the srews in a separete place, so that I new where these screws went to. The cleanup was pretty time consuming, but I was able to keep my stove, when every repairman I called to fix my stove told me I was better off buying a new stove. ($600.00 stove 2 years old)Please Note: The insulation blanket needed for the entire stove is two pieces, the sides and top are one part # and the bottom and back, are another part #. I did not know this. I just purchased the top and sides. I got lucky, the back and bottom were still in good shape. So I guess I should have read the description of the part more carefully to see what it covers, before I ordered it. It took two people two hours to do the work, it was really nice to have an extra set of eyes, to remember what direction pieces of metal from the stove went. I would do it all over in a heart beat instead of buying a new stove.
Parts Used:
-
Wendy from Red Hook, NY
-
Difficulty Level:Easy
-
Total Repair Time:More than 2 hours
-
Tools:Screw drivers
101 of 140 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!