Order within the next 5 hrs and your part ships today!
Questions And Answers for AD40DSL1
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Daryl
October 13, 2023
It does not collect water anymore. Is there a filter in this machine?
For model number AD40DSL1
Hi Daryl, thank you for contacting us. Your model does not come with a filter. We would recommend checking the bucket water level switch, part number PS992307, to fix the issue. When the water level in the collection tank reaches a certain level, the bucket water level switch gets triggered and sends a signal to the control board. If it is faulty, the dehumidifier may not collect water. We hope this helps, good luck with this repair!
The knob one turns to set the humidity level was removed. The two screws holding the top on were removed. The top was lifted and swung to the side. After noting which of the two wires went where on the humidistat the wires were removed. Small flat screwdrivers were used to pry back the plastic retainers on one side of the original failed humidistat. The new one was put in place, the two wires were reattached. The knob was replaced. The top was positioned and its two retaining screws replaced. A magnetic phillips screwdriver was handy but not necessary. Piece of cake! Someone with ten thumbs could do it!! Thanks for the prompt courteous attention to the returned erroneous part! Dealing with partselect. Com was a pleasure. . . . . . Thanks!! P. S. The dehumidifier works like new now!!