Models
>
79048773900
79048773900 Kenmore Wall Oven - Overview
Sections of the 79048773900
[Viewing 5 of 5]Keep searches simple, eg. "belt" or "pump".
![Temperature Sensor – Part Number: 316217002 Temperature Sensor – Part Number: 316217002](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/820208-1-S-Frigidaire-316217002-Temperature-Sensor.jpg)
Temperature Sensor
PartSelect #: PS820208
Manufacturer #: 316217002
Also known as Probe. The quick connect on this part may be different than your original part. If it doesn't fit, you have to cut off the quick connect and wire together with porcelain wire nuts.
$72.47
In Stock
![Light Bulb – Part Number: 316538904 Light Bulb – Part Number: 316538904](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/12751166-1-S-Frigidaire-316538904-Light-Bulb.jpg)
Light Bulb
PartSelect #: PS12751166
Manufacturer #: 316538904
Clear, 120 Volt, 40 Watt.
$25.08
In Stock
![Main Terminal Block Kit – Part Number: 5304409888 Main Terminal Block Kit – Part Number: 5304409888](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/471605-1-S-Frigidaire-5304409888-Main-Terminal-Block-Kit.jpg)
Main Terminal Block Kit
PartSelect #: PS471605
Manufacturer #: 5304409888
Terminal blocks (also called terminal boards or strips) provide a convenient means of connecting individual electrical wires.
$11.93
In Stock
![LENS – Part Number: 5304524341 LENS – Part Number: 5304524341](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/16218465-1-S-Frigidaire-5304524341-LENS.jpg)
LENS
PartSelect #: PS16218465
Manufacturer #: 5304524341
This lens covers the interior oven light bulb.
$15.66
In Stock
![Broil Element – Part Number: 318255605 Broil Element – Part Number: 318255605](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/3506411-1-S-Frigidaire-318255605-Broil-Element.jpg)
Broil Element
PartSelect #: PS3506411
Manufacturer #: 318255605
Retrieving data. Wait a few seconds and try to cut or copy again.
$199.00
In Stock
![Bake Element - 3400W – Part Number: 318254906 Bake Element - 3400W – Part Number: 318254906](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/1992188-1-S-Frigidaire-318254906-Bake-Element-3400W.jpg)
Bake Element - 3400W
PartSelect #: PS1992188
Manufacturer #: 318254906
This bake element is found on the bottom of the oven.
$252.49
In Stock
![GLASS – Part Number: 5304503232 GLASS – Part Number: 5304503232](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/11728351-1-S-Frigidaire-5304503232-GLASS.jpg)
GLASS
PartSelect #: PS11728351
Manufacturer #: 5304503232
This is also called the heat barrier glass.
$194.33
In Stock
![Light Lens Retainer Clip – Part Number: 5304400195 Light Lens Retainer Clip – Part Number: 5304400195](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/470510-1-S-Frigidaire-5304400195-Light-Lens-Retainer-Clip.jpg)
Light Lens Retainer Clip
PartSelect #: PS470510
Manufacturer #: 5304400195
This retainer secures the light lens to the oven cavity.
$41.26
In Stock
Questions And Answers for 79048773900
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the 79048773900
[Viewing 6 of 6]Little to no heat when baking
Fixed by
these parts
these parts
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/820208_1_s.jpg)
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/471605_1_S.jpg)
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/1992188_1_s.jpg)
Show All
Element will not heat
Fixed by
these parts
these parts
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/3506411_1_S.jpg)
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/1992188_1_s.jpg)
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/820208_1_s.jpg)
Show All
Oven is too hot
Fixed by
these parts
these parts
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/820208_1_s.jpg)
Show All
Will Not Start
Fixed by
these parts
these parts
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/471605_1_S.jpg)
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/820208_1_s.jpg)
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/439060_1_S.jpg)
Show All
Oven not heating evenly
Fixed by
these parts
these parts
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/820208_1_s.jpg)
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/471605_1_S.jpg)
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/3506411_1_S.jpg)
Show All
Little to no heat when broiling
Fixed by
these parts
these parts
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/3506411_1_S.jpg)
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/471605_1_S.jpg)
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Oven not heating to desired temperature
Replaced clock control by removing surface burner control knobs and plastic nuts, and then the cover over the oven control. Two screw hold the clock in place, after removal and disconnecting the plug-in you can reinstall the new clock control. The Heat Sensor inside the oven will also need to be replaced. It is located inside the oven and attached with two screws; the back of the oven will need to be removed to unplug. Reverse removal procedure and turn the power back on to the stove.
Parts Used:
-
Dan from Bellevue, ID
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
150 of 232 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broil element wasn't working...
I pulled my unit out of the wall and noticed that the insulation around the top broiler element was a bit brown. Closer inspection revealed that the element had shorted somehow to the oven itself and caused the element to become non-functional. I tried measuring the resistance first, and it was within typical values for the other elements, but I decided to replace the element anyway.
I ordered from PD and the part arrived just a few days letter by regular shipping. I undid the screws holding in the element, undid the wire connectors and replaced the broken element with the new one. The element worked like a charm and I was back in business for cooking.
I ordered from PD and the part arrived just a few days letter by regular shipping. I undid the screws holding in the element, undid the wire connectors and replaced the broken element with the new one. The element worked like a charm and I was back in business for cooking.
Parts Used:
-
Kevin from Alexandria, VA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
93 of 122 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Cord was not tightened enough by delivery crew.
PF alarm appeared on display. Noticed clicking when cord was moved. Had arced for some time and melted original block. New part slightly different. Only has 3 lugs, old one had six. Stack using washers provided. Take note of colors before disassembly. Use caution while working through access opening. The edges are sharp. Only tools needed are phillips screwdriver, deep socket for lug nuts. Nut driver optional. Hope this is helpful.
Parts Used:
-
Timothy from Spring Valley, AL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
96 of 153 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!