Models
>
18M33PCE
18M33PCE Amana Air Conditioner - Overview
Models starting with 18M33PCE
Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
![Igniter Kit – Part Number: 279311 Igniter Kit – Part Number: 279311](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/334180-1-S-Maytag-279311-Igniter-Kit.jpg)
Igniter Kit
PartSelect #: PS334180
Manufacturer #: 279311
This silicone carbide igniter with ceramic holder kit includes the 3" flat igniter, bracket, 4" wire leads, and the plug. It can replace both round and flat igniters. This kit is used for many gas clothes dryers.
$51.71
In Stock
![Screw, 8/18 x 3/8 – Part Number: WP90767 Screw, 8/18 x 3/8 – Part Number: WP90767](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/11746840-1-S-Maytag-WP90767-Screw-8-18-x-3-8.jpg)
Screw, 8/18 x 3/8
PartSelect #: PS11746840
Manufacturer #: WP90767
This screw is sold individually.
$6.91
In Stock
![Screw – Part Number: WP489349 Screw – Part Number: WP489349](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/11742742-1-S-Maytag-WP489349-Screw.jpg)
Screw
PartSelect #: PS11742742
Manufacturer #: WP489349
This screw is sold individually.
$10.26
In Stock
![Screw – Part Number: 67006425 Screw – Part Number: 67006425](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/1845599-1-S-Maytag-67006425-Screw.jpg)
Screw
PartSelect #: PS1845599
Manufacturer #: 67006425
This screw is sold individually
$10.26
In Stock
![Single Hex Head Screw – Part Number: WP489069 Single Hex Head Screw – Part Number: WP489069](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/11742731-1-S-Maytag-WP489069-Single-Hex-Head-Screw.jpg)
Single Hex Head Screw
PartSelect #: PS11742731
Manufacturer #: WP489069
Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2".
$6.91
In Stock
![Screw - 8-18 x 1/2 – Part Number: WP489464 Screw - 8-18 x 1/2 – Part Number: WP489464](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/11742751-1-S-Maytag-WP489464-Screw-8-18-x-1-2.jpg)
Screw - 8-18 x 1/2
PartSelect #: PS11742751
Manufacturer #: WP489464
Sold individually.
$13.81
In Stock
![Gasket - sold by the foot – Part Number: 10839706 Gasket - sold by the foot – Part Number: 10839706](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/2000008-1-S-Maytag-10839706-Gasket-sold-by-the-foot.jpg)
Gasket - sold by the foot
PartSelect #: PS2000008
Manufacturer #: 10839706
This gasket is gray and is made of a spongy material. This gasket is used for many air conditioners. It will come to you at the length you specify: one foot, two feet, whatever you require. When order...
No Longer Available
![Vertical Louver Gang Bar – Part Number: 20051404 Vertical Louver Gang Bar – Part Number: 20051404](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/2016078-1-S-Maytag-20051404-Vertical-Louver-Gang-Bar.jpg)
Vertical Louver Gang Bar
PartSelect #: PS2016078
Manufacturer #: 20051404
This vertical louver gang bar is almost four inches long. It is all black in color and is made of plastic. It controls the movement of an air conditioner's vertical louvers.
No Longer Available
Common Symptoms of models starting with 18M33PCE
[Viewing 1 of 1]Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
No heat to dry clothes
First I took the front of the dryer off then located the igniter. It only required removing two screws, removing old igniter, replacing with new igniter, and replacing the two screws.. While I was replacing the igniter I took the drum out and throughly cleaned the inside. Lucky me, I found 85 cents on the floor of the dryer. I am 65yrs old, married and mother of two.
This was easy to do and sure saved money. I reccommend others try to do repairs for themselves and using PartSelect was less expensive too.
This was easy to do and sure saved money. I reccommend others try to do repairs for themselves and using PartSelect was less expensive too.
Parts Used:
-
Karen from Pine Mtn. Club,, CA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
62 of 72 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
no heat
the ignitor did not glow red checked thermal fuse by exhaust duct. fuse open replaced thermal fuse
Parts Used:
-
rex from streator, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Wrench (Adjustable)
28 of 36 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
dryer stoped heating
the problem was not the igniter its was the thermal fuse I broke the igniter during inspection of the problem be careful its a very easy thing to break repairs complete thank you parts select for the quick shipping and low prices
Parts Used:
-
valerie from Elasmore, KS
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
23 of 26 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!