KitchenAid Dishwasher Wheels and Rollers
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular KitchenAid Dishwasher Wheels and Rollers
Lower Dishrack Wheel
PartSelect Number PS3406971
Manufacturer Part Number W10195416
This OEM gray Dishwasher Lower Dishrack Wheel Assembly is a plastic kit that allows the rack to slide in and out of the dishwasher easily. If it breaks or becomes damaged. sliding will feel difficult. This can happen due to normal wear and tear, and the part should be replaced if this occurs. Check your model number and user manual to make sure this part is correct. It attaches directly to the dishrack. To repair, open the dishwasher door and pull out the lower dishrack. Next, push the tab from both sides and it should pop out. To install the new wheel assembly, place it on the rack and make sure the caps overlap the wire from the inside before you clip it in place by pushing the wheel. It measures roughly 3x6 inches.
Fixes these symptoms
- Door latch failure
- Door won’t close
- Leaking
- See more...
Your Price
$46.69
Lower Dishrack Wheel Assembly
PartSelect Number PS11750057
Manufacturer Part Number WPW10195417
This gray plastic lower dishrack roller is a part for your dishwasher. It attaches to the bottom of the lower dishrack, allowing it to move in and out smoothly. If the lower dishrack stops moving in and out easily or preventing you from being able to shut the dishwasher door, inspect the dishrack roller for damage. The assembly includes 2 rollers and the bracket that attaches to the dishrack (parts are not sold separately). This assembly is sold individually, so you will need 4 assemblies to replace them all in your appliance. For this easy repair, start by removing the lower dishrack from the appliance and set it on the counter. Use a screwdriver to pry off the old roller assembly from the lower tabs. Align the new part on the dishrack by snapping it in place.
Fixes these symptoms
- Door latch failure
- Door won’t close
- See more...
Your Price
$38.02
Dishwasher Upper Dish Rack Wheel Mount
PartSelect Number PS11745459
Manufacturer Part Number WP8268743
This part is located on the top dish rack with two per side. It is sold individually. This upper dish rack wheel mount can be used on either side of your dish rack. It is sold individually. The part includes the wheel and support, which attaches to the dish rack and allows it to slide in and out easily
Fixes these symptoms
- Door latch failure
- Door won’t close
- Noisy
- See more...
Upper Rack Wheel with Mount
PartSelect Number PS11745451
Manufacturer Part Number WP8268655
This wheel and mount assembly is located on the upper dishwasher rack. They are sold individually and four are usually required for your model. Also known as stationary wheel mount.
Fixes these symptoms
- Door latch failure
- Door won’t close
- Noisy
- See more...
Upper Rack Wheel and Mount Assembly
PartSelect Number PS11745525
Manufacturer Part Number WP8270019
Sold Individually.
Fixes these symptoms
- Not cleaning dishes properly
- See more...
Your Price
$53.89
Dishwasher Upper Rack Roller
PartSelect Number PS11753471
Manufacturer Part Number WPW10350401
This assembly is the wheel and the mount for your upper dishrack. Sold individually. This is an authentic OEM part for use with Whirlpool, KitchenAid, Kenmore and Jenn-Air Dishwashers. The dishrack wheel lets you roll the rack easily on the support rails. This part is sold individually. The most common reason for replacing the dishrack wheel is if it breaks causing the rack to jam. The tool that you will need to replace the dishrack wheel is a flathead screwdriver.
Fixes these symptoms
- Door won’t close
- See more...
Your Price
$39.90
Upper Rack Wheel
PartSelect Number PS11748156
Manufacturer Part Number WPW10078214
Sold individually.
Lower Dishrack Wheel
PartSelect Number PS11748193
Manufacturer Part Number WPW10082868
This part attaches to the lower dishrack.
Dishwasher Dishrack Roller
PartSelect Number PS11755768
Manufacturer Part Number WPW10505748
This is a tub wheel assembly for your dishwasher. This assembly, complete with two rollers on a supporting bracket, supports the rack along the upper rail or track to allow the rack to slide smoothly. You may need to replace this if the rollers are broken or jammed. The part is gray in color and is made of plastic. You will need to remove your upper rack to install this replacement tub wheel assembly.
Your Price
$38.54
Stationary Wheel and Mount
PartSelect Number PS11745464
Manufacturer Part Number WP8268785
Sold individually.
Fixes these symptoms
- Door won’t close
- See more...
Related Parts
- All KitchenAid Dishwasher parts
- KitchenAid Dishwasher Brackets and Flanges
- KitchenAid Dishwasher Caps and Lids
- KitchenAid Dishwasher Circuit Boards and Touch Pads
- KitchenAid Dishwasher Dishracks
- KitchenAid Dishwasher Dispensers
- KitchenAid Dishwasher Doors
- KitchenAid Dishwasher Ducts and Vents
- KitchenAid Dishwasher Filters
- KitchenAid Dishwasher Handles
- KitchenAid Dishwasher Hardware
- KitchenAid Dishwasher Hoses and Tubes
- KitchenAid Dishwasher Latches
- KitchenAid Dishwasher Motors
- KitchenAid Dishwasher Panels
- KitchenAid Dishwasher Pumps
- KitchenAid Dishwasher Racks
- KitchenAid Dishwasher Seals and Gaskets
- KitchenAid Dishwasher Spray Arms
- KitchenAid Dishwasher Springs and Shock Absorbers
- KitchenAid Dishwasher Switches
- KitchenAid Dishwasher Wire Plugs and Connectors