This pump helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period of time.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Will not drain
This part works with the following products:
Washer.
This part works with the following products:
General Electric.
Part# WH23X10020 replaces these:
AP3207353, 1089358, WH23X10020
Customer Repair Stories
Average Repair Rating: 4.0 / 5.0, 3 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
washer would not drain
First I unplugged the washer. I removed the back of the washer and located the pump.I removed all the water from the pump, then I removed the hoses from the pump. I removed the wires from the pump and removed the two screws holding the pump in. I replaced the pump and reconnected everything. It works like new. The pump was the exact same thing ge sells but it cost a lot less.
Other Parts Used:
Joseph from SAINT JOSEPH, MO
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
23 of 27 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The motor burnt out on the pump
Well replacing the pump went fine. I even did a trial run on a rinse and spin cycle and it worked great. Then i ran another cylce of clothes and walked away thinking all is well. Much to my surprise when I went to go through the utility room it was flooded. I did some inspecting and realised that I had put a hose on backwards. LOL. The good thing was that after I fixed the hose all worked well and haven't had any trouble since then. Your company was the cheapest price I found and the quickest delivery. Thank you so much for your help. Sincerly, Chris Lewis
Other Parts Used:
CHRIS from DICKSON, TN
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
16 of 19 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
water leaking into the tub when not in use and would not drain after wash cycle
When washer failed to drain after washing, there was a test you can do with the display pad. Doing the test, the water pump would make a loud grinding noise. I knew the pump was bad, as the washer would not drain at all. The other problem was leaking water into the wash tub after washing. This had been a problem for a while . We were just turning the water off after washing clothes. This was a good time to repair this as well. Replaced the water control valve and that problem was solved as well.
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dennis
September 19, 2019
Does this part fit my washer and if not which one will
For model number WPGT9350COWW
Hello Dennis, thank you for inquiring. Yes, this is the correct replacement for your model. Good luck with your repair!
Was this helpful?
Thank you for voting!
Joe
September 21, 2021
Can I get just the short hoses from the washer tub to the pump and the other short hose going out to the connector where the drain hose connects
For model number WPGT9350C0WW
Hi Joe,
Thank you for your question. The part number listed under your model number for the connector hose is PS961042. The part number listed for the tub to pump hose is PS961044. If you would like to place an order for these parts, you may order them either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS960873
Manufacturer Part Number: WH23X10020
