Control Panel with Touchpad - Black

Hi Alana, Thank you for the great question. The Error code E0 F2 indicates there is a short int he keypad. Here are some steps you can take to fix the problem. 1. Check keypad connector for firm connection (keypad connects to control board). 2. Press CANCEL. If error code returns after 60 seconds, replace keypad (also called touch pad or membrane switch). Some models incorporate keypad in to control board as one unit. In this case, replace control board (also called ERC or clock). Hope this helps!

Hello David, Thank you for your inquiry. Yes you would have to replace the panel if you can no longer see the display. Hope this helps!

Hi Robert, Thank you for your question. The F2 E6 error code means: Cancel Key Line Open - Check the connection between the touch pad (keypad) and control board (clock) to make sure it is secure. Select the 'cancel' function and wait 60 seconds. If error code reappears then replace the touch pad, or touch pad and control board (clock) if all one assembly. I hope that helps. Good luck with your repair.

Hi Pam, Thank you for your question. Check the connections between the touch pad and the electronic control board to see if they are connected correctly. If the ribbon cable on the touchpad is dirty, you can try dusting it see if this helps. You will also need to test both the touchpad and the electronic control board to see which part is causing the issue. I hope this helps. Thank you and have a great day!

Hello Danny, Thank you for the question. I suggest testing the Thermal Fuse, PartSelect Number PS11742563. When the fuse trips due to a malfunction in the oven this part will trip and shut down your oven controller. It is usually located behind your control panel. Hope this helps, good luck with this repair!

Hi Althea, thank you for your question. You would actually be looking for your electronic control board then. I have linked that part down below for you. Unfortunately that part has been discontinued by the manufacturer and the manufacturer has not provided an authorized substitute.The only other thing that I could think of would be to contact your manufacturer and see if they have another part from a different model that will work with yours. If they do have another part that will work, get the part number so that you can search it on our website to see the cost of the part. I hope that helps. Good luck with your repair.

Hello Guy, Thank you for the question. The Control Panel and Touchpad is no longer made in white, just black. The E6-F2 error code indicates a problem with the touchpad or the electronic oven control. E6-F2 specifically means the cancel key drive line is open. You can't cancel this error code, but sometimes removing the power from the oven and reconnecting it will cure it. If not you can start with the touchpad. If the touchpad did not fix the issue you may have an issue with the Control Board Part Number: PS374804. I looked up the part and it is listed as No Longer Available/Discontinued. There is no part substitutions listed. My suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers. Hope this helps!

Good Day Daria. Thank you for your question in regards to your unit (Model Number RBD305PDB8). This could be the result of a damaged control panel that needs to be replaced or there may be an issue with the wiring. Hope this helps. Best Regards.

Hello Emil, Thank you for your inquiry. Although we do not have a repair video for this exact part number, I have included a link to a repair video for a similar model to assist you with replacing the control panel. Hope this helps! https://www.youtube.com/watch?v=F2WxrjGc95o&t=17s

Hello, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is Part Number: PS374804. I looked up the part and it is listed as No Longer Available/Discontinued. There is no part substitutions listed. My suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers. Hope this helps!