This is a genuine burner control knob replacement. The burner control knob allows you to control the size of the flame coming from your cooktop burner. It is approximately two inches in diameter, and ...
$56.34
In Stock
Order within the next 8 hrs and your part ships today!
Order within the next 8 hrs and your part ships today!
Questions And Answers for WCG97US6DS00
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Iris
February 20, 2020
Need knobs for my stove top stove
For model number WCG97US6DS00
Hello, Thank you for your question. Here is the knob you will need to order- Part #: PS11756643. We hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Shelia
February 18, 2020
I need to see instructions on how to install the cook top
For model number WCG97US6DS00
Hello and thank you for writing.
We would be happy to do some research to find you the correct instructions. However, we need your model and serial numbers of the unit itself and the brand name to locate any information on this. Model numbers can be short or long and could have a mixture of numbers and letters. We hope this helps. Please contact us anytime if you require further assistance. We are looking forward to your response.
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
The knob was ordered from the original knob and it should have fit. It was the right color but was too small to fit valve on stove. Also, it didn't have any markings on the rim to identify start, lo, high etc. After returning knobs three times I was determined I was not going to return another one if I could make this one fit.I used pliers to squeeze the valve a tiny bit and then the knob fit. I put it on the 5th burner which I rarely use so it doesn't matter if it isn't marked. If I did have to use it I could just judge by the flame if it was at the right setting for me.After having this range for only a couple of years or so I have decided that I wouldn't order another one like it if I needed a new stove. There are a couple other things I didn't like about it so add them all up and opinion has been formed.I do have to say that this company has been wonderful about helping me out though.
First step is to turn gas off to cook top and also disconnect power to the unit. Than using a crescent wrench disconnect the gas line going to the unit from the Regulator. Than again using the crescent wrench disconnect the regulator from the bottom of the unit. Next remove the nipple that connects the gas line to the regulator from the old unit. Apply new pipe dope to the threads and screw it into the new one and tighten down. Next install the regulator to the unit and install the gas line to the regulator. once done with the install you can now plug the unit in and turn on the gas. You are now ready to use the cook top again