This drum support roller is sold individually. Most dryers require two. The tri-rings are included. This is a drum support roller for a dryer. It is a genuine replacement part. The part includes the d...
$28.94
In Stock
Order within the next 10 hrs and your part ships today!
This thermostat may differ in appearance, but functions the same as the original part. This part controls the temperature of the inside of the dryer drum and prevents the dryer from overheating.
$60.89
In Stock
Order within the next 10 hrs and your part ships today!
If you notice that your dryer is noisy or will not tumble, you may need to replace the tri ring. This part is triangular, and is less than an inch in size. Tri rings can be found both on the idler pul...
$17.12
In Stock
Order within the next 10 hrs and your part ships today!
Also known as Thermal Cut-Off kit. The thermostat acts as a safety mechanism that keeps the dryer from overheating and the fuse is like a backup system - it's set to trip at a higher temperature than...
$67.95
In Stock
Order within the next 10 hrs and your part ships today!
This is the moisture sensor for your dryer. It helps detect the amount of moisture in your clothes during the dryer cycle. If you notice your clothes are still wet after an automatic dryer cycle is do...
$13.67
In Stock
Order within the next 10 hrs and your part ships today!
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$10.21
In Stock
Order within the next 10 hrs and your part ships today!
This ten watt appliance light bulb is two inches tall. It is used with both washers and dryers.
$20.81
In Stock
Order within the next 10 hrs and your part ships today!
Questions And Answers for MEDB850YW0
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Patsy
November 11, 2021
Need year this was manufactured please
For model number MEDB850YW0
Hello Patsy, thank you for your question. We believe this was manufactured in 2008> We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Shelly
December 31, 2019
There is a knocking and squeaking sound my dryer makes constantly while running. It heats and dries just fine just makes these annoying sounds. What part do i need to fix this? Thank you
For model number MEDB850YW0
Hello Shelly and thank you for writing.
It certainly sounds like it could be a faulty drum support roller PS11752609 and/or idler pulley PS11756154, you should check for signs of damage, and replace if necessary. We hope this helps. Please contact us anytime.
Hi Peggy, thank you for reaching out. Based on our understanding of the issue, we would suggest you check the thermal cut-off fuse, part number PS334387, as it is the most likely cause of this issue. When it blows, the dryer stops generating heat. We hope this solves your problem!
Need heating element not sure witch one to get do I get just the heating element or do I need the kit
For model number MEDB850YW0
Hi Darrel, thank you for your question. Part number PS11746337 is what you need. We have also added an installation video to assist you with your repair.
After a few years of slamming the dryer door (at least that is what my husband says), the catch on the dryer door broke. Using pliers (I used needle nose) squeeze the outer edges of the catch together (vertically). With it compressed, it should slide out easily. My husband had jacked with ours prior to the repair, so the broken piece in the door was actually sideways and would not fit through the hole. Using a screwdriver, I pushed that piece into the door (it lives in the door somewhere now). I was then able to slide out the rest of the old catch. Compress the new catch and insert it into the hole in the door. Push it in until it clicks into place. DONE! Happy Drying!
I asked for advise, looked around and priced heating elements and thermostats. This was the best combo offered for the price given. It was shipped and received it very quick. Installed it and 5 minutes later, she was running like a champ!