This manufacturer-approved air filter system for refrigerators eliminates odors and any impurities. It does this by neutralizing and removing odor-causing molecules. For best results, it is important ...
$40.49
In Stock
Order within the next 3 hrs and your part ships today!
This genuine PureSource Ultra water filter will fit most Frigidaire french door and side by side refrigerators. You will find this filter located in the back, top right of the appliance. It is white i...
$107.46
In Stock
Order within the next 3 hrs and your part ships today!
This crisper cover front support is used to keep the crisper shelf in place and may need replacing if the door will not open or close. This white, OEM part measures roughly 1 inch in diameter and can ...
$15.15
In Stock
Order within the next 3 hrs and your part ships today!
The Bottom Door Bin is also commonly known as a "cantilever shelf" is a clear plastic drawer which holds items in the bottom area of your fridge's interior, on the door. This OEM part is very easy to ...
$75.37
In Stock
Order within the next 3 hrs and your part ships today!
This authentic rear crisper support is a white, plastic part which is rated as "easy" to install by our customers. This OEM part replaces the rear crisper cover support in your fridge and mounts to th...
$16.83
In Stock
Order within the next 3 hrs and your part ships today!
This original equipment manufacturer Door Shelf is a white plastic part which holds items inside of your freezer or refrigerator door. It is roughly 10 inches long by 4 inches high by 5.5 inches wide....
$85.77
In Stock
Order within the next 3 hrs and your part ships today!
This bin can be moved according to space needed. It holds items on the door of your refrigerator.
NOTE: This bin is only available in clear plastic now.
$123.81
In Stock
Order within the next 3 hrs and your part ships today!
This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer. The run capacitor is attached to the compressor. This part is 120 volts a...
$66.01
In Stock
Order within the next 3 hrs and your part ships today!
Questions And Answers for FGHS2631PF3
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bruce
December 9, 2019
Freezer isn't freezing after water filter was changed..fan keeps cycling on and off every 10 seconds but no freezing
For model number FGHS2631PF3
Hello Bruce and thanks for writing.
Was it the correct OEM filter PS2364646 you replaced? As we are hearing from many customers that bought aftermarket filters having that same problem. If it is not water filter related, this could be caused by a faulty defrost thermostat PS469522 test and replace if needed. We hope this helps. Please contact us anytime.
This is for a water filter for a Frigidaire Gallery. The frig is about 8 years old. Cannot find this water filter anywhere.
For model number FGHS2631PF3
Hello Karen, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Part #: PS2364646. You will find this filter located in the back, top right of the appliance. We hope this information helps!
I am in need of the lever on the freezer door ice maker that allows the ice to flow when pushed. Can you give me the part #?
For model number FGHS2631PF3
Hello Teresa, thank you for contacting us. The dispenser lever for your model comes with the ice dispenser module, part number PS8692021. Please reach out to customer service if you need help placing an order, anyone will be happy to assist you!
Put the wrong size light bulb in the lower lights (fridge) and short-circuited the whole unit. The memory board on the front of the freezer is out. No power. Help please.
For model number FGHS2631PF3
Hello Carol, thank you for your inquiry. Based on our understanding of the issue, you may need to replace the dispenser control board, part number PS16555508. The dispenser control board houses the selection buttons and electronic display for the refrigerator, and lets you control various settings for the refrigerator. We hope this helps.
wHERE IS THE EVAP FAN MOTOR LOCATED AND HOW TO REPLACE
For model number FGHS2631PF3
Hi Leroy, thank you for getting in touch. We have attached a video which may not be of the exact part and model, but it will help you locate and replace this part. We hope that helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
In my specific appliance the water valve is located in the bottom right hand corner looking at it from the back. To get to it I remove the thin layer of cardboard the covers the back of the fridge. I then proceeded to disconnect the 1/4" copper tubing which is the water feed coming out of the wall. Then I removed the screws that hold the valve assembly in place. I took the water valve out and removed the electrical connections as well as the plastic tubing which feed the water dispenser and the ice maker. To install the new water valve it was just a matter of reversing steps.