Also known as Probe. The quick connect on this part may be different than your original part. If it doesn't fit, you have to cut off the quick connect and wire together with porcelain wire nuts.
$64.15
In Stock
Order within the next 9 hrs and your part ships today!
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
William
December 7, 2019
The oven works - we just need to replace the stove top - is this possible?
For model number EW30IS65JSA
Hi William, yes this part is linked below. Thank you for your question and good luck with your repair!
Hello, Thank you for your inquiry. We have researched the model you have provided and we would recommend checking the following parts to fix your issue: the temperature sensor, the broil element, the bake element, the thermostat, and the main terminal block. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
I need a lens cover for the oven light and the light bulb
For model number EW30IS65JSA
Hi Ron, thank you for contacting us. According to our research, the part number for the lens cover of the light bulb is PS16218465. The oven light lens cover comes in an assembly with the socket and wiring. The part number for the assembly is PS10062768. We hope this helps!
CONTROL PANEL IS INOPERABLE. CAN NOT SET PREFERENCES, CHANGE TIME, OR ACTIVATE INDUCTION EYES.. BREAKER HAS BEEN RESET. PANEL DISPLAYS ERROR CODE "5 F". CONTROL. LOCK LOCKS AND UNLOCKS DOOR.
For model number EW30IS65JSA
Hello Bob, thank you for your query. Based on our research, if the control displays an error code F, this means that the electronic control has detected a fault condition. Push the cancel pad to clear the display and stop the display from beeping. Reprogram the oven. If the fault reoccurs, you may need to check the electronic control, part number PS2378973, to solve the problem. It monitors the oven temperature and controls the oven heating functions in the range, and includes a digital display for the time and temperature settings. We hope this sorts out your problem!
My large burner no longer recognizes my cast iron pan even thou the rest of the elements do.
For model number EW30IS65JSA
Hi Michael, thank you for reaching out. Make sure that the pan you are using is of the proper size and you are placing it correctly. If this is not the issue, then we would recommend replacing the surface element, part number PS3501098, to solve the problem. Glad to be of help!
Replaced clock control by removing surface burner control knobs and plastic nuts, and then the cover over the oven control. Two screw hold the clock in place, after removal and disconnecting the plug-in you can reinstall the new clock control. The Heat Sensor inside the oven will also need to be replaced. It is located inside the oven and attached with two screws; the back of the oven will need to be removed to unplug. Reverse removal procedure and turn the power back on to the stove.
PF alarm appeared on display. Noticed clicking when cord was moved. Had arced for some time and melted original block. New part slightly different. Only has 3 lugs, old one had six. Stack using washers provided. Take note of colors before disassembly. Use caution while working through access opening. The edges are sharp. Only tools needed are phillips screwdriver, deep socket for lug nuts. Nut driver optional. Hope this is helpful.
Repair was quite easy, as long as you have the instructions for removing the door. The screws that hold the bottom of the door to the fixed hinge are placed into the side of the hinge assembly after removal; this holds the door at a 45 degree angle for easy removal. After that, just place the door on a flat surface and dismantle the door from the inside. The inner glass is contained in a metal frame with another piece of glass; this frame comes apart easily using the clips in each side. The door assembles easily after the glass is replaced; just take your time and give yourself enough room to lay out the parts as you go. Good luck!